Magazine Hints
Never oil the escapements nor put oil in the magazine. To do so will cause escapement trouble.
Do not slam the magazine entrance when closing it. There may be a matrix overhanging the edge that you have overlooked, and you will damage the matrix and the back end of the magazine.
Never pound the magazine to make matrices drop. Locate the cause of the trouble and remove it.
Don’t forget, when pulling down the magazine entrance, to do so quickly, as opening it slowly is liable to cause a matrix to fall into the magazine flatwise.
Never try to force a matrix past the escapement. If it will not come through easily, pull it out the back way.
A wooden reglet with a rubber band around the end will be found convenient for removing a flat matrix from the magazine.
Never attempt to remove a magazine without first inserting the locking bar.
Do not expect a rusty or bent locking bar to work freely. Clean it; if bent, straighten it.
Never put a No. 5 magazine on the machine until you have run your fingers along the opening at the back side of the lower end to make sure there are no matrices with the lugs in the opening. If there are, push them back in the magazine. Just one lug in this opening will prevent the magazine seating properly.