To Change an Ejector Blade
Push in on the starting and stopping lever; let the vise down to first position; back the machine by pushing back on cam No. 1 until the second elevator falls on the safety hook; turn the mold disk until the slot is in front of the blade; push the ejector lever forward; remove the blade by reaching the right-hand in alongside the mold slide and grasp the releasing lever and draw it towards the front. Change the blade for the size wanted, and then let machine come to normal position. Be careful not to get a blade wider than the slug to be cast or there is danger of damaging the liners, or the mold will be damaged. A good plan is always to check up on the ejector blade after changing the liners.