To Remove a Distributor Box
Back the machine until the second elevator descends from its seat. Pull down on the magazine channel entrance. (If the box is equipped with the automatic font distinguisher, press in on the stud until the distinguisher is resting against the lower front rail of the box and turn the stud to right a quarter of a turn.) Press downward on the handle of the screw which holds the box in position and unscrew until it stops. Pull downward on the box.
Care must be used in replacing the box to seat as high as it will go and have the washer on the screw so that it clamps the box bracket to the distributor beam. Turn upward on the handle of the screw.
The new distributor box bracket is provided with pins that fit in a groove in the distributor beam to prevent the box being placed in any other than the correct position.