BIOCHEMICAL OXYGEN DEMAND.
The quantity of river mud most suitable for the determination of the biochemical oxygen demand ranges within certain limits, largely according to the amount of oxidizable matter present. For examinations of river mud prepare a 1 per cent stock suspension in distilled water or tap water saturated with oxygen and free from nitrate; use in the test a dilution of this stock suspension equivalent to a concentration of 1 to 10 grams per liter of mud. For examinations of fresh sewage sludge prepare a 1 per cent stock suspension in a similar manner, but use in the test a dilution equivalent to only 0.1 to 1.0 gram per liter of wet material. For examinations of dried sludges, which have undergone more or less oxidation higher concentrations may be required.
Procedure.—Place a measured portion of the sample, or the proper amount of the 1 per cent stock suspension of the sample, in a 300 cc. narrow-mouth glass-stoppered bottle, and dilute it to the desired concentration with water saturated with oxygen. Determine the oxygen content at 20° C. of the waters that are used for dilution. This determination must be made before the mud or sludge is added because iron sulfide in the mud or sludge rapidly consumes part of the dissolved oxygen. Incubate at 20° C. for five days.
Shortly before the determination of the oxygen remaining in solution at the end of five days rotate the bottle once or twice to mix its contents and allow sedimentation for about 30 minutes. Siphon the greater part of the liquid through a narrow-bore siphon into a 150 cc. bottle, which has been filled with carbon dioxide. Reject the first 25 cc. of the siphoned liquid and allow a little to overflow at the end of siphoning. Determine the oxygen content of the solution in the bottle in the usual way (pp. [65]–68). Report the oxygen demand in percentage of the dried mud or sludge.