Experiment 5. To close the end of a small tube.
Hold one end of a piece of No. 2 tube in the blowpipe flame (Fig. 10), turn it slowly, and heat until the end closes. Does it close nicely?
Close one end of a piece of No. 4 in the same way.
You can close No. 6 tubing in this way, but it leaves a large lump of glass which may crack on cooling or on reheating. You will practice closing No. 6 tubing later.
The “why” of it
The glass becomes soft when heated because it becomes almost a liquid, and if it is heated sufficiently it becomes entirely a liquid. In this respect it acts very much as pitch, rosin, and wax act when heated by the sun or by a fire.
FIG. 11
MAKING A GLASS BUBBLE
The end of a glass tube becomes smooth, or closes entirely, when heated, for the following reason: The surface of any liquid tries to take the smallest possible area (this is explained in detail under “Surface Tension” in the Gilbert book on “Experimental Mechanics”), for example, a small particle of water takes the shape of a drop, a sphere, and the surface of a sphere has the least area for a given amount of water. Now when the end of the glass tube is heated it becomes a liquid, and the surface of this liquid contracts the glass into a smooth rounded surface of least area. If the tube is heated still more, the surface contracts still more and closes the end.