PROBLEM: A BORDERED TABLE SCARF
This problem will require the use of the four-harness loom. The first thing to do is to procure the written pattern for the border and draw it in. When the drawing in is completed and the weaving is begun, the first step in the process is to weave a few inches of the plain cloth. In doing this, however, we shall, of course, find that the pressing of the right-hand and left-hand pedals as in simple weaving will not accomplish the desired result; for it has already been explained that the pedals of a four-harness loom must be worked in certain pairs to produce a plain weave. It will be remembered that to do plain weaving with the warp drawn in as required by the pattern illustrated on [page 268], it is necessary to press pedals 1 and 3 together alternately with 2 and 4—i. e., both pedals of each pair must be pressed at the same time to produce the same effect as that produced by the alternate movements of the right and left pedals in simple weaving.
When a sufficient length of plain cloth has been woven, the written pattern for the weaving of the border design must be faithfully consulted and the right pairs of pedals pressed down in proper order for the weaving of the pattern. The second or weaving shuttle carries the bobbin, which is filled with the colour required in the pattern. Any changes of colour required by the design are easily produced by inserting a new bobbin filled with the desired colour.
The Design.—A great variety of design is possible in table scarfs. It is common to weave in a narrow beading of whatever colour may have been chosen, following this by a few threads of white, and this in turn by a narrow band of the colour of the border with some slight suggestion of the pattern, then more of the plain white and finally the full pattern of the border. The centre of the table scarf is simply a matter of plain weaving in white or possibly in some solid colour, while the other end of the scarf must be woven with the same border and bands as were woven at first, but in the reverse order.
Variations in Design.—One pleasing style of decoration is found in repeating the border several times with inch-wide spaces between. Another variety requires a heavy border at the ends, with narrow ones at short intervals throughout the length. Shadow borders, so-called, are also common, and may alternate with borders of colour or may constitute the entire decoration. Shadow borders are heavy borders woven in the cream or body colour of the scarf instead of being in a contrasting shade. In order to make them stand out well it is necessary to use a coarser thread than is required for the colour borders. A gray linen plain weave is often embellished in white with delicate effect. There is also a heavy linen thread which is good for scarf borders. It is obtainable in dainty colours, and the heavy thread seems to bring out the patterns in greater perfection. Darning silks in fast colours are also employed, but these should be woven double in order to obtain the best effect. They are found in the market in short lengths and in such attractive colours as Delft blue, reseda green, pink, and catawba. The last two colours, used with linen in the natural shade, make a happy combination.
Scarfs should be woven from 20 to 24 inches wide and about 11⁄2 yards long, unless some special use requires that they should be of different length. Not only do they make pleasing table covers, but they are useful as tray cloths, and from them charming sewing or embroidery aprons may be fashioned by folding one end over, tying it with ribbons, and arranging pockets to hold the work. One scarf will make two aprons. Fancy bags are also woven on the same general lines as scarfs, but the width needs to be only 8 or 10 inches. These may be woven of the pattern throughout, or they may be striped with bands or borders. Lined with silk and finished with ribbons or cords, they are very much admired for embroidery and other fancy work.