Slow Motion.
A slow motion is usually fixed on new frames, and as will be seen from [Fig. 16], it is a simple and effective method for preventing brown or hard places in the warp by running the machine very slowly instead of stopping it completely. A thin pulley rides on a collar on the main shaft of the frame, and by the gearing shown ([Fig. 16]) drives the driven cone far slower than its usual speed. Obviously the fast and slow motions could not be both connected with the driven cone by fixed gearing, and consequently, to enable the slow motion to be put in gear only after the fast speed is out of action, the shaft only drives a plate carrying a ratchet pawl. The ratchet wheel is on the driven cone shaft, and as the pawl only overtakes the wheel when the latter is almost stopped, the desired end is obtained.
FIG. 16.