BRIDGES, ARCHES, ROOFS, AND STRUCTURAL DESIGN
Strains in Ironwork. By Henry Adams. Fourth edition, 8 plates, 65 pp., crown 8vo. (1904.) 5s.
Designing Ironwork. By Henry Adams. Second series. 8vo, sewed.
Part I. A Steel Box Girder. (1894.) 9d. net.
" II. Built-up Steel Stanchions. (1901.) 1s. 3d. net.
" III. Cisterns and Tanks. (1902.) 1s. net.
" IV. A Fireproof Floor. (1903.) 1s. net.
Columns and Struts. Theory and Design. By Wm. Alexander. 101 illus., xii + 265 pp., demy 8vo. (1912.) 10s. 6d. net.
A Practical Treatise on Segmental and Elliptical Oblique or Skew Arches. By G. J. Bell. Second edition, 17 plates, 125 pp., royal 8vo. (1906.) £1 1s. net.
Economics of Construction in relation to Framed Structures. By R. H. Bow. Third thousand, 16 plates, 88 pp., 8vo. (1873.) 5s.
Theory of Voussoir Arches. By Prof. W. Cain. Third edition, 201 pp., 18mo, boards. (New York, 1905.) 2s. net.
New Formulæ for the Loads and Deflections of Solid Beams and Girders. By W. Donaldson. Second edition, 11 illus., viii + 56 pp., 8vo. (1872.) 4s. 6d.
Plate Girder Railway Bridges. By M. Fitzmaurice. 4 plates, 104 pp., 8vo. (1895.) 6s.
Pocket Book of Calculations in Stresses. By E. M. George. 66 illus., 140 pp., royal 32mo, half roan. (1895.) 3s. 6d.
Tables for Roof Framing. By G. D. Inskip. Second edition, 451 pp., 8vo, leather. (New York, 1905.) 12s. 6d. net.
Stresses in Girder and Roof Frames, for both dead and live loads, by simple Multiplication, etc. By F. R. Johnson. 28 plates, 215 pp., crown 8vo. (1894.) 6s.
A Graphical Method for Swing Bridges. By B. F. La Rue. 4 plates, 104 pp., 18mo, boards. (New York, 1904.) 2s. net.
Bridge and Tunnel Centres. By J. B. McMasters. Illustrated, 106 pp., 18mo, boards. (New York, 1893.) 2s. net.
Notes on Cylinder Bridge Piers and the Well System of Foundations. By J. Newman. 144 pp., 8vo. (1893.) 6s.
Calculation of Columns. By T. Nielsen. 4 plates, 36 pp., 8vo. (1911.) 4s. 6d. net.
A New Method of Graphic Statics applied in the Construction of Wrought Iron Girders. By E. Olander. 16 plates, small folio. (1887.) 10s. 6d.
Steel Bar and Plate Tables. Giving Weight of a Lineal Foot of all sizes of L and T Bars, Flat Bars, Plates, Square and Round Bars. By E. Read. On large folding card. (1911.) 1s. net.
Reference Book for Statical Calculations. By F. Ruff. With diagrams, 140 pp., crown 8vo. (1906.) 5s. net.
Suspension Bridges and Cantilevers. By D. B. Steinmann. vii + 185 pp., 18mo, boards. (Van Nostrand Series, No. 127.) (New York, 1911.) 2s. net.
The Anatomy of Bridgework. By W. H. Thorpe. 103 illus., 190 pp., crown 8vo. (1906.) 6s. net.