Environmental Safety Studies
The AEC Division of Reactor Development and Technology has supported extensive environmental studies to assess the safety of isotopic power sources (to be discussed later) in oceanic environments. One of the most important of these is being conducted by the Naval Radiological Defense Laboratory at an ocean environmental testing complex near San Clemente Island off the coast of California, which includes a shore installation and a floating ocean platform. These studies are to determine seawater corrosion of containment alloys and fuel solubility in seawater; the dispersion of the fuel in the ocean; the effect of the radioactive material on marine life; and the radiation hazard to man, when all significant exposure pathways are considered.
In another study the Chesapeake Bay Institute of Johns Hopkins University investigated potential hazards that might result if radioactive materials were released off the Atlantic Coast. Five areas along the Continental Shelf were examined in detail for environmental factors such as vertical diffusion. The same Institute made environmental and physical dispersion studies off Cape Kennedy, Florida, to predict the fate of any radioactive materials that might be released in aborted launchings of nuclear rockets or nuclear auxiliary power devices for space uses. Fluorescent dye was released into offshore, surf zone, and inshore locations; the diffusion was observed, sampled, and compared with existing diffusion theory. Mathematical models have been developed that can now be used to predict the rate and extent of diffusion in the Cape Kennedy area in the event of any radioactivity release from aborted test flights.
Similar studies have been carried out near the space launching site at Point Arguello, California, by the Scripps Institution of Oceanography. These included collection of data on dispersion, marine sediments, and the biological uptake of radioactive plutonium, polonium, cesium, and strontium.