CUTTING AND POLISHING OF GEMSTONES
There are two types of widely used gemstone cuts. Opaque or figured gemstones are usually cut with a rounded upper surface and a flat or rounded back. A stone cut in this fashion is termed a cabochon or is said to be cabochon cut. There are several variations of this mode of cutting ([fig. 2]). Precious opal, agate, jade, star sapphire, and fossil wood are some of the stones that are cut mostly as cabochons. Transparent gemstones are usually cut with many plane polished surfaces. Such stones are called faceted, and the process of cutting and polishing these stones is called faceting. Emerald, diamond, topaz, and garnet are examples of gemstones that are commonly seen as faceted stones.
Fig. 2. Variations of the cabochon cut. Left to right: double cabochon; flat cabochon; simple cabochon; hollow cabochon.
The cutting of gemstones, although sometimes tedious and time consuming, is not especially difficult or complex. However, like most arts and crafts, technique and ability should improve with practice and experience. There are currently many amateur gem cutters in Texas. A complete set of equipment necessary to cut cabochon stones may be purchased for as little as $50.00 or $60.00. Most amateur cabochon cutters have equipment that cost less than $100.00 which enables them to do very fine work on many gem materials. Facet cutting requires more precise equipment, and a complete array of such usually costs more than $100.00, although less expensive equipment can be obtained. The beginning gem cutter or lapidary who is willing to assemble and make some of his own equipment can reduce his initial expenses considerably.