LEATHER.
TAN-YARD AND PITS.
Tanning is the name given to the process for converting the skins of animals into leather, by combining them with a substance called “Tannin.” This tannin exists in many vegetable substances, such as oak-bark, gall-nuts, catechu, sumach, &c.: all of these, and many more, are used for tanning, but, on account of its cheapness, oak-bark is the usual substance employed. It is tannin which gives the quality of astringency to many vegetables, and this very taste of astringency is produced by a partial combination of the tannin with the surface of the mouth.
UNHAIRING THE SKIN.
The skins (called “hides” or “pelts”) are first freed from all loose pieces of flesh, fat, or skin; the hair is then removed by soaking them in lime and water. The skins are then laid in the “tan-pit” between layers of crushed oak-bark until the pit is nearly full; water is then pumped in, and the whole is allowed to remain for several weeks or months (according to the thickness of the skin), during which time, however, the skins are changed in position by removing them from one pit to another with fresh bark in it, so that those taken from the top of the first are placed at the bottom of the next; and this is done from time to time, in order that all may receive the same pressure and strength of tan-liquor. Very thick hides take a year to tan perfectly in this way, and consequently many processes have been tried to quicken the operation; but the leather made most slowly seems to wear the best, and consequently fetches the higher prices.
DRYING ROOMS.
Skins which are thin, and to be used for fancy work, and for book-binding and glove-making, are either tanned with “sumach,” or with alum and salt made into a paste with flour and yolk of eggs; this is put into a tub, and the mixture and skins worked together with the hands till they are thoroughly united.
SUMACH TAN TUBS.
Besides boots and shoes, leather is used for the harness of horses, covers for seats, gloves, and innumerable other purposes.
SPLITTING MACHINE.
For some purposes the leather is required to be very thin, and of exactly one thickness. This is obtained by the process of splitting, for which a machine is used whose exactness is such, that one slice is taken from the inner part of the whole skin, reducing it in thickness without cutting a hole in any part. The skin is stretched tightly round a roller, which slowly revolves against a straight knife-edge, fixed at a certain distance from it, according to the thickness of the skin, and which is passed by the machine backwards and forwards, cutting the skin a little further each time.