LIBRARY TABLE.
Use two shallow boxes and their covers. Spool boxes might be used, but caramel boxes would be better.
1. Use both covers for the legs. Cut them the height the table is to be.
2. Turn one box bottom up; fit the two pieces of the covers on the ends and fasten.
3. Turn the other box bottom up and fit it in from the bottom. Slide it up or down until the proportions look right for the shelf. Fasten the shelf at both ends to the legs.
4. Fasten on the projecting top. This may be the cover of a slightly larger box or of extra cardboard.
5. Shape the legs. You might cut vertical slats in the ends between the shelf and top.
6. Paint to match furniture.
Details of Library Table.
- Two shallow boxes the same size.
- Caramel or spool boxes
- Cover of slightly larger box or piece of cardboard
- Both covers cut the height of legs.
- One box fastened in for top of table
- Other box fastened lower down for shelf
- Larger cover or cardboard fastened as top of table.