MARSHALL FOX'S AIRSHIP
In the early days of the war an airship was constructed by Mr. Marshall Fox which is worthy of mention, although it never flew. It was claimed that this ship was a rigid airship, although from its construction it could only be looked upon as a non-rigid ship, having a wooden net-work around its envelope. The hull was composed of wooden transverse frames forming a polygon of sixteen sides, with radial wiring fitted to each transverse frame. The longitudinal members were spiral in form and were built up of three-ply lathes. A keel of similar construction ran along the under side of the hull which carried the control position and compartments for two Green engines, one of 40 horse-power, the other of 80 horse-power, together with the petrol, bombs, etc.
In the hull were fitted fourteen gasbags giving a total capacity of 100,000 cubic feet. The propeller drive was obtained by means of a wire rope. The gross lift of the ship was 4,276 lb., and the weight of the structure, complete with engines, exceeded this.
It became apparent that the ship could never fly, and work was suspended. She was afterwards used for carrying out certain experiments and at a later date was broken up.
Apart from the various airships built under contract for the Government there do not appear to be any other ships built by private firms which were completed and actually flew. It is impossible to view this lack of enterprise with any other feelings than those of regret, and it was entirely due to this want of foresight that Great Britain entered upon the World War worse equipped, as regards airships, than the Central Empires or any of the greater Allied Powers.
CHAPTER IV
BRITISH ARMY AIRSHIPS
The French and German military authorities began to consider airships as an arm of the Service in the closing years of the nineteenth century, and devoted both time and considerable sums of money in the attempt to bring them to perfection. Their appearance in the British Army was delayed for many years on account of the expense that would be incurred in carrying out experiments. In 1902, Colonel Templer, at that time head of the Balloon Section, obtained the necessary sanction to commence experiments, and two envelopes of gold-beaters skin of 50,000 cubic feet capacity were built. With their completion the funds were exhausted, and nothing further done until 1907.