PLAN No. 717. FOLDING IRONING-BOARD
This ironing-board is a step-saver. Being hinged to the wall, it is always ready and in place. It may be hooked up against the wall when not in use. The leg (braced) is hinged to the board and falls flat when the board is lifted. With it down and in use the leg is not in the way and skirts may be ironed without lifting or changing. The directions for making are as follows: The ironing-board is 57 inches long and rounded at the free end and should be made of thoroughly seasoned wood, 11⁄2 inches in thickness.
Its width at its attached end is 15 inches, at the free end 101⁄2 inches. The leg (brace) is 561⁄2 inches if the board is attached to the wall at 33 inches from the floor. If the board is higher the leg is longer. Attach the leg to the board 11 inches from its free end, by hinges.
The board should be padded with any heavy material such as cotton flannel or a blanket, and brought to the under side of the board and tacked smoothly in place. The ironing-sheet should be 4 inches wider than the board with tapes on opposite sides about 10 inches apart to tie it in place.