PLAN No. 935. DISABILITIES FOR MACHINE OPERATING
Such disabilities as slight deafness, blindness in one eye, hernia, or minor troubles of the heart, liver, kidneys, or digestion will not bar a man who can turn out fair work. Injuries to the fingers, hands, and arms have always been common in the woodworking industry and many of the best men have been disabled more than once. Some men have to change machines on account of injuries but not many lose out entirely.
The loss of an arm or a leg would require intelligent placement on a particular machine. Some machines, including spindle carvers and some types of belt sanders, may be operated by men while sitting down. A great many machines require but little movement from a standing position, and could be operated by a man with one injured limb after some training.
There is usually considerable dust in the air of a machine room, and this dust may be injurious to men with tuberculosis. Furthermore, men who are quite deaf or whose sight is not good, and who are certain to find it hard to handle material quite rapidly with safety to themselves and others, should avoid the machine room.
Overcoming Handicaps
In order to become accustomed to disabilities men will be trained in schools or shops to use injured members and thus to overcome the natural disinclination to use such members freely. Each man in training will change from one machine to another until he finds his place. Special training on machines will be offered in schools where, under a practical instructor, a man may try himself out.
The operator will be taught in school to take care of his machine and remove dull cutters, knives, and saws. If he can be trained to set the knives and cutters in an automatic machine his future employment at good wages is assured. There is at present a strong demand for men who can operate automatic machines and set them up for a variety of work.
Employers may be willing to substitute automatic or power feed machines for other types, at least where this may be done to the great advantage of the employer himself, as in the case of wood turning. A disabled man operating a modern automatic lathe can turn out a quantity of perfect work quite as easily as any other workman.
Unlike the machinist the machine woodworker does not often work from blue prints. He needs only to learn to understand a stock bill stating the dimensions of the finished parts in plain figures, and is not concerned about the destination of these parts. All routing from machine to machine is looked after by the foreman.
Previous Experience an Asset
Previous experience and training will often provide the man who is trying to come back with certain useful information about machine processes, adjustments, and lubrication. For instance, a carpenter who is incapacitated for climbing or for outside work, or a sawmill hand who requires indoor employment because of his injury may easily fit in as a machine operator.