CURTISS BIPLANE
The Curtiss biplane, which we have seen has had a great deal to do with the development of aviation, is one of the simplest and most successful machines known to-day. The main planes of the regular-sized machines have a spread of 26-1/2 feet, are set 5 feet apart, and have a depth from front to rear of 4-1/2 feet. The total wing area is 220 feet. The direction rudder is a single vertical vane at the rear, which is turned by the steering wheel connected by cables. The elevation rudder consisting of one horizontal plane 24 square feet in area is at the front and is turned up or down by the pilot as he desires to sail up or down, by means of a long bamboo pole connecting the elevation rudder with his pilot wheel. He pushes the wheel forward or back to rise or descend, while he twists it from right to left to turn in either of those directions. The side-to-side balance was maintained in the early Curtiss machines by flexible wing tips, but these later were replaced by ailerons placed between and at the outer tips of the main planes. Each aileron had an area of 12 square feet and they were operated by a brace fitted to the operator's body. Thus, if the machine tipped to the right, the operator would swing to the left, turn the ailerons, and right the machine. In some later Curtiss biplanes these ailerons were replaced by others, like flaps attached to the rear outer edges of the main planes. By raising the flaps on one side and lowering them on the other the balance was well preserved.
As before stated, these machines are driven by Curtiss engines. In most of them the engines are 4-cylinder, 25-horsepower motors. The cylinders in this type, of course, are stationary, but the engine shaft is directly connected with the 6-foot propeller at the rear, which makes 1,200 revolutions per minute. The pilot sits between the two main planes of his engine. On large Curtiss machines seats for as many as three passengers have been arranged at the sides of the pilot.
The most important work Curtiss has done in the last few years is the development of the hydro-aeroplane, which has been explained.