Operations with the Fleet
Early in the spring of 1914 another Zeppelin, the L-3 ([Plate 8]) was delivered. It held 787,400 cubic feet (22,300 cubic meters) of hydrogen and carried besides its own weight approximately 19,840 pounds (9,000 kilograms). The average speed was 43.5 miles (70 kilometers) per hour with motors aggregating 630 horsepower. It carried at least 6,614 pounds (3,000 kilograms) to a height of 9,186 feet (2,800 meters). The L-3 was the only naval airship Germany possessed at the beginning of the war.
Zeppelin Airship Bldg. Co.’s Plant, Friedrichshafen, 1910. Showing First Double Shed (now used for Hull Frame Work only) Machine Shops, Foundries and Office Buildings.
Zeppelin Airship Bldg. Co.’s Plant, Friedrichshafen, 1919. Note the two large single sheds. The largest shed is 115 feet high, 151 feet wide and 787 feet long.
Following the ideas of the inventor both the German army and navy used the Zeppelins for strategical reconnoissance in the early days of the conflict. The Zeppelins flew the western and eastern boundaries of the empire seeking information concerning the movements of the Allied armies. This proved dangerous, however, for the airships then could not rise to high altitudes; and consequently were exposed to enemy fire from the batteries below and airplanes above.
The L-3 operated with the fleet in the North Sea and her activities served to show the value of supplying as quickly as possible Zeppelins able to fly high and with greater speed than ever. It was also found advisable to cease flying over land by day. The Zeppelins became the night cruisers of the air, and were assigned the task of destroying railway junctions, bridges and ammunition dumps along the enemy line of advance.
The Navy soon acquired the Zeppelins L-4, L-5, L-6 and L-7, which joined the L-3 in the North Sea operations where they became indispensable as the eyes of the fleet and a continual menace to the enemy attempting to establish himself on the German Coast. All these airships were duplicates of the L-3 except in minor details. Their hulls long and cylindrical, of uniform cross sections, that is excepting the ends each part was the same size as the others. This was the first attempt at standard construction and it permitted quantity production more economical and quicker for they were not compelled to design and fabricate each section as it was needed. The plant at Friedrichshafen had been expanded and was working to capacity. Every effort was made to save time. The result was remarkable for they were able to produce one Zeppelin every six weeks. Late in 1914 the Zeppelin Z-11 was delivered to the army and the L-8 to the navy.