THE EDISON ELECTRIC LOCOMOTIVE
In 1880, Mr. Thomas A. Edison, at Menlo Park, New Jersey, perfected a series of electric-railway motors and locomotives that were actually employed in hauling freight and passengers. The following year Mr. Edison made a contract with Mr. Henry Villard, which stipulated that the inventor was to construct an electric railway at least two miles and a half in length, which was to be equipped with two locomotives and three cars, one locomotive for freight and one for passengers, the passenger locomotive to have a capacity of sixty miles an hour. It was agreed that if the experiment with this railway proved successful Mr. Villard was to reimburse Mr. Edison for the actual outlay, and to install at least fifty miles of electric road in the wheat regions of the Northwest.
The electric locomotives built by Mr. Edison were constructed along the usual lines of steam locomotives, with cab, headlight, and cowcatcher, the motive power being applied from the motors to the axle by means of friction pulleys. This method was soon abandoned, as the pulleys slipped a great deal before the locomotive actually started. A system of belts which was substituted proved more satisfactory. The current was conveyed to the motor through the track, and was supplied to the road by underground cables connecting from the dynamo-room of Mr. Edison's laboratory. The rails were insulated from the ties by coatings of Japan varnish, and by placing them on pads made of muslin impregnated with tar.
From the very first this road gave promise of success. The tireless genius of Edison was constantly finding and correcting defects, and there was every prospect that in a few months a practical and economical electric railway would be an accomplished fact. Then came the financial crash of the Northern Pacific Railway, involving the fortune of Mr. Villard, and tying the hands of the inventor at Menlo Park for the time being.
The year following, however, Mr. Field and Mr. Edison combined their forces and formed a company for perfecting and constructing electric locomotives and railways. In the same year an electric railway was put in operation at the Chicago Railway Exposition, the chief promoters of this enterprise being Messrs. Field, F. B. Rae, and C. O. Mailloux. In the gallery of the building a circular track, something like a third of a mile in length, was laid, and on this an electric locomotive named The Judge hauled a single car which carried over twenty-six thousand passengers in the month of June. In the autumn of the same year, The Judge was used for hauling passengers on a track at the Louisville Exposition. It was capable of attaining a speed of twelve miles an hour, and its average speed was eight miles. It was twelve feet long over all, weighed something like three tons, and, like Edison's locomotive, was equipped with cowcatcher, headlight, and cab. The current was taken from a surface, or feed rail, by means of bundles of phosphor-bronze wire, so arranged that a good clean contact would be made on each side of the rail whether the car was moving forward or backward.