BUTTERSCOTCH (BRITTLE).

Put sugar, glucose and water in kettle on hot fire, stir until it boils, wash down sides of kettle, then put cover on until it steams well, remove cover and put thermometer in and cook to about 300, then set kettle off the fire and put in the butter, stirring it through the batch thoroughly, then put the kettle back on the fire, and you must now stir it constantly; but before you put the butter in it should not be stirred. Just before you put in the butter, take out the thermometer, as it is less trouble to stir the candy with the thermometer out, and it does not need to be cooked to any exact degree. In putting in the butter, you reduce the temperature of the batch about fifteen degrees, and it is necessary to cook it, after the butter is put in, up to about the point it was before; but you will have no trouble with this, and as soon as it boils up good and hard and commences to turn color a little, drop some off the spoon very quickly in cold water, and if it forms a mass of threads in the water it is done. Be very sure to stir this well after the butter is in it or it will stick. When done, set off the fire and add a good teaspoonful of lemon extract, stir it in well and if you have a funnel, pour it in the funnel, and drop on greased slab in wafers, which is the nicest way to make this butterscotch; or you may pour the whole batch, if you wish, on the greased slab, putting your bars on edge of slab to keep it from running off, and let it run over as large a surface as possible, as the thinner it is, the nicer it will be. Mark it in squares, but do so very quickly, as it does not take it long to harden; and always remember this: that you must take your spatula or a long butcher knife, and loosen the whole batch thoroughly from the slab before it gets perfectly cold, as then it will not stick when cold and also loosen the wafers. Your slab must be well greased before pouring this on, but no matter how well you grease it, if you allow the candy to get perfectly cold before loosening it, you will find it will stick somewhat. In loosening this candy before it gets cold, we do not mean to take it off the slab, but just to simply run something under and loosen it, letting it remain on the slab afterward, and you will find that it does not stick.