(149) Expansion of Steam.
In order to reduce the amount of steam used, the valve does not allow the steam to follow the piston at full boiler pressure through the entire stroke, but cuts it off at a certain point after the piston has started on its travel. As the volume of the steam is increased by the further travel of the piston after the point of cut-off, the steam expands in volume until the end of the stroke is reached, at which point the pressure is naturally much below the initial or boiler pressure. This reduction in temperature and pressure results in a wider working temperature range than would be the case with the steam following the piston throughout the stroke, and as the steam is exhausted to atmosphere at a temperature much lower than that of the boiler steam, much less heat is carried out through the exhaust. As a general rule, the most economical point of cut-off is at ¼ of the stroke. Engines requiring more steam than is supplied at ¼ cut-off in order to carry the load, are too highly taxed for efficient results. Since the most efficient point of cut-off is only ¼ of the possible steam travel it is evident that an engine can carry a load much greater than that for which it is rated, but it is also evident that this increased capacity is gained at the expense operating economy. Wear and tear on the engine parts are also duly increased.
Fig. 134. Case Steam Tractor.