CHAPTER IV.
PHYSICAL PROPERTIES.
B—Cleavage.
By cleavage is meant the manner in which minerals separate or split off with regularity. The difference between a break or fracture and a "cleave," is that the former may be anywhere throughout the substance of the broken body, with an extremely remote chance of another fracture being identical in form, whereas in the latter, when a body is "cleaved," the fractured part is more readily severed, and usually takes a similar if not an actually identical form in the divided surface of each piece severed. Thus we find a piece of wood may be "broken" or "chopped" when fractured across the grain, no two fractured edges being alike; but, strictly speaking, we only "cleave" wood when we "split" it with the grain, or, in scientific language, along the line of cleavage, and then we find many pieces with their divided surfaces identical. So that when wood is "broken," or "chopped," we obtain pieces of any width or thickness, with no manner of regularity of fracture, but when "cleaved," we obtain strips which are often perfectly parallel, that is, of equal thickness throughout their whole length, and of such uniformity of surface that it is difficult or even impossible to distinguish one strip from another. Advantage is taken of these lines of cleavage to procure long and extremely thin even strips from trees of the willow variety for such trades as basket-making.
The same effect is seen in house-coal, which may easily be split the way of the grain (on the lines of cleavage), but is much more difficult and requires greater force to break across the grain. Rocks also show distinct lines of cleavage, and are more readily split one way than another, the line of cleavage or stratum of break being at any angle and not necessarily parallel to its bed. A striking example of this is seen in slate, which may be split in plates, or laminæ, with great facility, though this property is the result of the pressure to which the rock has been for ages subjected, which has caused a change in the molecules, rather than by "cleavage" as the term is strictly understood, and as existing in minerals. Mica is also another example of laminated cleavage, for given care, and a thin, fine knife to divide the plates, this mineral may be "cleaved" to such remarkably thin sheets as to be unable to sustain the most delicate touch without shattering.
These are well-known examples of simple cleavage, in one definite direction, though in many instances there are several forms and directions of cleavage, but even in these there is generally one part or line in and on which cleavage will take place much more readily than on the others, these planes or lines also showing different properties and angular characters, which, no matter how much fractured, always remain the same. It is this "cleavage" which causes a crystal to reproduce itself exactly, as explained in the last chapter, showing its parent form, shape and characteristics with microscopic perfection, but more and more in miniature as its size is reduced.
This may clearly be seen by taking a very small quantity of such a substance as chlorate of potash. If a crystal of this is examined under a magnifying glass till its crystalline form and structure are familiar, and it is then placed in a test-tube and gently heated, cleavage will at once be evident. With a little crackling, the chlorate splits itself into many crystals along its chief lines of cleavage (called the cleavage planes), every one of which crystals showing under the microscope the identical form and characteristics of the larger crystal from which it came.
The cleavage of minerals must, therefore, be considered as a part of their crystalline structure, since this is caused by cleavage, so that both cleavage and crystalline structure should be considered together. Thus we see that given an unchangeable crystal with cleavage planes evident, it is possible easily to reproduce the same form over and over again by splitting, whereas by simply breaking, the form of the crystal would be lost; just as a rhomb of Iceland spar might be sawn or broken across the middle and its form lost, although this would really be more apparent than real, since it would be an alteration in the mass and not in the shape of each individual crystal. And given further cleavage, by time or a sudden breaking down, even the mass, as mass, would eventually become split into smaller but perfect rhombs.
Much skill is, therefore, required in cutting and fashioning a precious stone, otherwise the gem may be ruined at the onset, for it will only divide along its lines of cleavage, and any mistake in deciding upon these, would "break," not "split" the stone, and destroy the beauty of its crystalline structure. An example of this was specially seen in the great Cullinan diamond, the splitting of which was perhaps the most thrilling moment in the history of precious stones.[A] The value of the enormous crystal was almost beyond computation, but it had a flaw in the centre, and in order to cut out this flaw it was necessary to divide the stone into two pieces. The planes of cleavage were worked out, the diamond was sawn a little, when the operator, acknowledged to be the greatest living expert, inserted a knife in the saw-mark, and with the second blow of a steel rod, the marvellous stone parted precisely as intended, cutting the flaw exactly in two, leaving half of it on the outside of each divided portion. The slightest miscalculation would have meant enormous loss, if not ruin, to the stone, but the greatest feat the world has ever known in the splitting of a priceless diamond was accomplished successfully by this skilful expert in an Amsterdam workroom in February, 1908. Some idea of the risk involved may be gathered from the fact that this stone, the largest ever discovered, in the rough weighed nearly 3,254 carats, its value being almost anything one cared to state—incalculable.
[A] The hammer and knife used in cutting the diamond, the two largest pieces of which are now called "The Stars of Africa," together with a model of the great uncut stone, are in the Tower of London amongst the Regalia.
These cleavage planes help considerably in the bringing of the stone to shape, for in a broad sense, a finished cut stone may be said to be in the form in which its cleavages bring it. Particularly is this seen in the diamond "brilliant," which plainly evidences the four cleavage planes. These cleavage planes and their number are a simple means of identification of precious stones, though those possessing distinct and ready cleavages are extremely liable to "start" or "split" on these planes by extremes of heat and cold, accidental blows, sudden shocks and the like.
In stones possessing certain crystalline structure, the cleavage planes are the readiest, often the only, means of identification, especially when the stones are chemically coloured to imitate a more valuable stone. In such cases the cleavage of one stone is often of paramount importance in testing the cleavage of another, as is seen in the perfection of the cleavage planes of calcite, which is used in the polariscope.
It sometimes happens, however, that false conditions arise, such as in substances which are of no form or shape, and are in all respects and directions without regular structure and show no crystallisation even in the minutest particles; these are called amorphous. Such a condition sometimes enters wholly or partially into the crystalline structure, and the mineral loses its true form, possessing instead the form of crystals, but without a crystalline structure. It is then called a pseudomorph, which is a term applied to any mineral which, instead of having the form it should possess, shows the form of something which has altered its structure completely, and then disappeared. For instance: very often, in a certain cavity, fluorspar has existed originally, but, through some chemical means, has been slowly changed to quartz, so that, as crystals cannot be changed in shape, we find quartz existing—undeniably quartz—yet possessing the crystals of fluorspar; therefore the quartz becomes a pseudomorph, the condition being an example of what is termed pseudomorphism. The actual cause of this curious chemical change or substitution is not known with certainty, but it is interesting to note the conditions in which such changes do occur.
It is found that in some cases, the matrix of a certain shaped crystal may, after the crystal is dissolved or taken away, become filled by some other and foreign substance, perhaps in liquid form; or a crystalline substance may become coated or "invested" by another foreign substance, which thus takes its shape; or actual chemical change takes place by means of an incoming substance which slowly alters the original substance, so that eventually each is false and both become pseudomorphs. This curious change often takes place with precious stones, as well as with other minerals, and to such an extent that it sometimes becomes difficult to say what the stone ought really to be called.
Pseudomorphs are, however, comparatively easy of isolation and detection, being more or less rounded in their crystalline form, instead of having sharp, well-defined angles and edges; their surfaces also are not good. These stones are of little value, except in the specially curious examples, when they become rare more by reason of their curiosity than by their utility as gems.
Some also show cleavage planes of two or more systems, and others show a crystalline structure comprised of several systems. Thus calcspar is in the 2nd, or hexagonal, whilst aragonite is in the 4th, the rhombic, system, yet both are the same substance, viz.:—carbonate of lime. Such a condition is called dimorphism; those minerals which crystallise in three systems are said to be trimorphous. Those in a number of systems are polymorphous, and of these sulphur may be taken as an example, since it possesses thirty or more modifications of its crystalline structure, though some authorities eliminate nearly all these, and, since it is most frequently in either the 4th (rhombic) or the 5th (monoclinic) systems, consider it as an example of dimorphism, rather than polymorphism.
These varieties of cleavage affect the character, beauty and usefulness of the stone to a remarkable extent, and at the same time form a means of ready and certain identification and classification.