HARE, Roast, to Carve.
The “Grand Carver” of olden times, a functionary of no ordinary dignity, was pleased when he had a hare to manipulate, for his skill and grace had an opportunity of display. Diners à la Russe may possibly, erewhile, save modern gentlemen the necessity of learning the art which was in auld lang syne one of the necessary accomplishments of the youthful squire; but, until side-tables become universal, or till we see the office of “grand carver” once more instituted, it will be well for all to learn how to assist at the carving of this dish, which, if not the most elegant in appearance, is a very general favourite. The hare, having its head to the left, as shown in the woodcut, should be first served by cutting slices from each side of the backbone, in the direction of the lines from 3 to 4. After these prime parts are disposed of, the leg should next be disengaged by cutting round the line indicated by the figures 5 to 6. The shoulders will then be taken off by passing the knife round from 7 to 8. The back of the hare should now be divided by cutting quite through its spine, as shown by the line 1 to 2, taking care to feel with the point of the knife for a joint where the back may be readily penetrated. It is the usual plan not to serve any bone in helping hare; and thus the flesh should be sliced from the legs and placed alone on the plate. In large establishments, and where men-cooks are kept, it is often the case that the backbone of the hare, especially in old animals, is taken out, and then the process of carving is, of course, considerably facilitated. A great point to be remembered in connection with carving hare is, that plenty of gravy should accompany each helping, otherwise this dish, which is naturally dry, will lose half its flavour, and so become a failure. Stuffing is also served with it; and the ears, which should be nicely crisp, and the brains of the hare, are esteemed as delicacies by many connoisseurs.
ROAST HARE.