UNIFORM REQUIREMENTS.
The following specifications for the manufacture of Steam Fire Pumps, developed from those originally drawn by Mr. John R. Freeman, are now used throughout the whole country, having been agreed upon in joint conference by representatives of the different organizations interested in this class of work. They will be known as “The National Standard,” and have been up to this time adopted by the following associations: Associated Factory Mutual Fire Insurance Companies, National Board of Fire Underwriters, National Fire Protection Association.
NATIONAL STANDARD SPECIFICATIONS
For the Manufacture of
STEAM FIRE PUMPS
1. Workmanship.
a. The general character and accuracy of foundry and machine work must throughout equal that of the best steam-engine practice of the times, as illustrated in commercial engines of similar horse-power.
This refers to strength of details, accuracy of foundry work, accuracy of alignment, accuracy of fits, quality of steam joints and flanges, construction of steam pistons and slide-valves, etc., and does not apply particularly to exterior finish.
2. Duplex Only.
a. Only “Standard Duplex pumps” are acceptable.
So-called “Duplex” pumps consisting of a pair of pumps with “steam-thrown valves” actuated by supplemental pistons are not acceptable.
Experience shows that duplex pumps are more certain of starting after long disuse. The whole power of the main cylinder is available for moving a corroded valve or valve rod, whereas on a single pump with a “steam-thrown” valve no such surplus of power is available.
Further, the direct acting duplex has the great advantage over a fly-wheel pump of not suffering breakage if water gets into steam cylinder.
3. Sizes of Pumps.
a. Only the four different sizes given on the [next page] will be recognized for “National Standard” pumps.
The multiplicity of odd sizes of “Trade Pumps” is confusing, and different makers have, in the past, estimated the capacity in gallons according to different arbitrary standards.