HOW TO SET A FINIAL.
Bore a hole in the upper end of the centre-staff and insert in it the lower end of finial rod; when the centre-staff is put to its place, plumb the finial rod by moving the lower end of the centre-staff before it is nailed to the floor or cross timbers. ([See page 74.])
No. 1. No. 2. No. 3.
NET PRICES: 5 Foot $12.00. 6 Foot $14.40. 7 Foot $16.80.
For either Round, Square or Octagon.
No. 1 includes all above the Shingles. ([See page 73.])
There is no shoddy work about these Finials. They are heavy, substantially made and zinc coated.
SHIPPING DEPARTMENT
COOPERS CROOKS.
(Patented August 20th, 1889.)
Complete and in Sections. Fixed and Adjustable.
The most Perfect Machine-made Elbow ever manufactured.
First-class Finish.—Each piece is a perfect section of a curved tube.
A Convenience.—The sections can be put together to form any angle.
Durable and Strong.—The finished elbows are redipped after being locked and riveted.
Quality.—Both Retinned and Galvanized.
Perfect in fitting, uniform in size and quality. Just what the practical tinsmith should use for conductors and vent pipes.
| ADJUSTABLE. | FIXED. | IN SECTIONS. | |||||
| Size. | Tin. | Galv’d. | Size. | Tin. | Galv’d. | Size. | Tin. |
| 3 inch | $1.55 | $2.00 | 3 inch | $2.00 | $2.00 | 3 inch | $1.45 |
| 4 inch | 2.80 | 3.90 | 4 inch | 3.90 | 3.90 | 4 inch | 2.50 |
| Discount.......................... | |||||||
MANUFACTURED ONLY BY
THE NATIONAL SHEET METAL ROOFING CO.
510 to 520 East 20th Street, New York.