Archimedean Screw and Liquid
This device was made public by a communication from a correspondent to "Mechanics' Magazine" in England, in 1823. The device is described as follows:
A is the screw turning on its two pivots G G; B is a cistern to be filled above the level of the lower aperture of the screw with mercury (which I conceive to be preferable to water on many accounts, and principally because it does not adhere or evaporate like water); C is a reservoir, which, when the screw is turned round, receives the mercury which falls from the top; D is a pipe, which by the force of gravity conveys the mercury from the reservoir C on to (what, for want of a better term, may be called) the float-board E, fixed at right angles to the centre of the screw, and furnished at its circumference with ridges or floats to intercept the mercury, the moment and weight of which will cause the float-board and screw to revolve, until, by the proper inclination of the floats, the mercury falls into the receiver F, from whence it again falls by its spout into the cistern G, where the constant revolution of the screw takes it up again as before.
To overcome this (the power of the fluid in the screw to turn it backwards), I thought of placing a metallic ball, or some mercury, on the ledge above the floats (as at H in the drawing), of just so much weight, and no more, as would exactly neutralize this backward endeavor; whether or no this would increase the difficulty of raising the mercury in the screw I cannot say, having never tried the experiment.