MAGNETOS IN GENERAL
One of the great advantages resulting from the use of a magneto is that for ordinary running it does away with the necessity for the hand advance of the spark. The greater the speed at which a magneto runs, the more abrupt is the change in the strength of the magnetic field, and in consequence the greater is the intensity of the current delivered. When running at slow speed, the spark produced in the cylinder will be weak and thin; it will be sufficient to ignite the mixture, but the ignition will occur slowly. At high speeds, on the contrary, the intensity of the current produced will be such that a flame rather than a spark will be produced, and ignition will occur much more rapidly and positively. When starting an engine on the magneto, the spark control lever must be advanced more than is necessary for ignition by battery, and the engine must be cranked at such a speed that the magneto will produce a current sufficient for ignition. Once started, it is rarely necessary to move the spark control lever, except for high speeds, for speeding the engine up by opening the throttle will increase the speed of the magneto, and the flaming spark will result in a quicker ignition of the mixture.
Because a magneto does not deliver a continuous current, it cannot be driven by a belt or by friction, for a slight slip would throw it out of time with the engine. The best drive is by gears, for this is positive, and there is a minimum of lost motion. In some cases the magneto is driven by chain and sprocket, and while this prevents slipping, there is considerable lost motion when the chain is loose enough to run smoothly, and the magneto cannot be timed as accurately as is possible with gears.