SPRING
Cooling System: Drain and reverse flush. Check thermostat. Check condition of radiator hose fan belt. Refill cooling system and install Rust Inhibitor.
Crankcase: Clean inside of engine crankcase. Clean Floto screen. Change engine oil. Install new filter cartridge if not recently changed.
Brakes: Check brakes for need of service.
Steering: Check wheel alignment (camber, toe-in, king pin inclination). Inspect all steering connections.
Generator: Check generator output.
Battery: Test specific gravity of battery. Check water level. Clean, tighten, and coat terminals with petroleum jelly.
Cylinder Head: Tighten cylinder head bolts with torque wrench.
Lubrication: Lubricate chassis (unless performed in last 1000 miles) including any periodic lubrication requirements due.
Fuel System: Clean fuel pump bowl and reset carburetor adjustment if necessary.
Starter: Check efficiency for proper current draw from battery.
THESE REQUIREMENTS MAY VARY WITH DIFFERING CLIMATIC CONDITIONS.