Plate 10. Half Tone
These three plates are not entirely comparable, since the heavy shadows in the right hand bottom portion of the photogravure have been touched up by the engraver. This was not intended by the author, but the plate was retained as it shews that directions regarding this point should not be omitted when sending the drawing or photograph to be reproduced. It also indicates that for critical work, when an exact a facsimile as possible is required, collotype should be used, for the plate cannot be touched up.
With regard to the reproduction of drawings shaded by means of wash or pencil, the same remarks apply, with the addition that if it be possible to express what is desired by other means, suitable for reproduction by line block, these latter should be employed. To illustrate this point, Figures 5, 6, and Plate 11 have been inserted; all illustrate the vascular skeleton of a fern (Marattia fraxinea), the first one is in outline and the second is shaded by lines of varying thickness; both of these are reproduced by means of the line block, whilst the third is a reproduction by half-tone of a pencil-shaded drawing. In order to obtain a fair comparison, the half-tone is reproduced as a plate, owing to the fact that it would not print satisfactorily on the paper used for the letterpress.
