Closing Glass Jars
Closures for glass jars are of two main types:
Metal screwband and flat metal lid with sealing compound. To use this type, wipe jar rim clean after produce is packed. Put lid on, with sealing compound next to glass. Screw metal band down tight by hand. When band is tight, this lid has enough give to let air escape during processing. Do not tighten screw band further after taking jar from canner.
Screw bands that are in good condition may be reused. You may remove bands as soon as jars are cool. Metal lids with sealing compound may be used only once.
Porcelain-lined zinc cap with shoulder rubber ring. Fit wet rubber ring down on jar shoulder, but don’t stretch unnecessarily. Fill jar; wipe rubber ring and jar rim clean. Then screw cap down firmly and turn it back ¼ inch. As soon as you take jar from canner, screw cap down tight, to complete seal.
Porcelain-lined zinc caps may be reused as long as they are in good condition. Rubber rings should not be reused.
76944B
Metal screw band Metal lid with sealing compound Seals here
76944B
Porcelain lined screw cap Rubber Seals here