CANADA

The producers of synthetic resins in Canada are:

Bakelite Corporation of Canada, Ltd.Toronto.
Shawinigan Chemicals, Ltd.Shawinigan Falls.
Canadian General Electric Co.Toronto.
Canadian Industries, Ltd.Toronto.

The Bakelite Corporation of Canada, Ltd., an affiliate of the firm of the same name in the United States, was formed in 1925. This plant makes molding materials, laminating materials, and an extensive line of technical varnishes. Molded parts were made at this factory until 1932.

Shawinigan Chemicals, Ltd. is the pioneer organic chemical maker in Canada. A modern plant at Shawinigan Falls, Quebec, produces synthetic acetic acid, acetaldehyde, vinyl acetate, vinyl resins, and other chemicals. The vinyl resins manufactured by this firm have already been described (see p. [44]). Appreciable quantities of these resins have been exported to the United States in the past but the construction of a factory (jointly owned by Shawinigan Chemicals, Ltd., and the Fiberloid Corporation) at Indian Orchard, Mass., for the manufacture of vinyl resins will probably result in a decrease of exports from Canada to the United States.

The Canadian General Electric Co. makes alkyd resins for use in surface coatings. Phthalic anhydride and other raw materials are imported from the United States. Canadian Industries, Ltd., produces alkyd resins at a plant in Toronto, Ontario.

There are about 14 molders of synthetic resins in Canada, of which all but 3 are in Ontario. These firms make a general line of molded articles including electrical articles, closures, costume jewelry, and smokers’ accessories. Appreciable quantities of molded articles are imported from the United States and smaller quantities from Germany.