Synthetic resins and their raw materials / A survey of the types and uses of synthetic resins, the organization of the industry, and the trade in resins and raw materials, with particular references to factors essential to tariff consideration. Under the general provisions of section 332, title III, part II, Tariff act of 1930.

by United States Tariff Commission

Description and uses.

The Tariff Act of 1930 defines crude naphthalene as naphthalene solidifying under 79° C. after the removal of all water present; and refined naphthalene as that having a solidifying point at or above 79° C. after the removal of all water present.

Crude grades, melting between 70° and 78.5° C., are found in commerce as yellow, red, or brown crystalline solids. These grades are used in the manufacture of phthalic anhydride and other coal-tar intermediates; in the manufacture of lampblack; to enrich illuminating gas and sometimes motor fuel; in synthetic tanning materials; and in certain insecticides. Probably its most important outlets are as a raw material for phthalic anhydride (see p. [98]) and refined naphthalene.

Refined grades, melting above 79° C., are marketed as white, crystalline lumps or flakes. Their principal uses are in the manufacture of intermediates, dyes, medicinals, solvents, and textile assistants; as moth repellants; as a lubricant when mixed with rapeseed oil; to remove the “bloom” from lubricating oils; as a preservative for rubber goods and animal skins; and in explosives (trinitro naphthalene). In 1936 more than 75 coal-tar intermediates made from naphthalene were commercially produced in the United States. Of the 75 million pounds of these intermediates produced in that year, 31 million pounds were phthalic anhydride, an important component of synthetic resins of the alkyd type.