Production in the United States.

The production of tar-acid resins in the United States has increased markedly in the last 10 years. Table [3] shows the production and sales of all coal-tar resins in 1927 and 1928 (when there was no further break-down available but when this classification was made up chiefly of tar-acid resins) and of tar-acid resins from 1929 to 1937. The figures given are in net resin content and do not include fillers, modifiers, or pigments. From 1929 to 1937 production increased from 26 million pounds to 80 million pounds; sales from 25 million pounds valued at 9.9 million dollars to 74 million pounds valued at 13.3 million dollars; the value per pound dropped from 39 cents to 19 cents.

In 1937 the production of tar-acid resins for molding accounted for about 40 percent of the total; those for surface coatings, about 25 percent; those for lamination, about 20 percent; and those for miscellaneous uses, about 15 percent.

Table 3. Tar-acid resins: United States production and sales 1927-37

YearProduction
(net resin
content)
Sales
Quantity
(net resin
content)
ValueUnit value
PoundsPounds
1927113,452,23013,084,313$6,094,656$0.47
1928120,411,46520,778,8567,211,958.35
1929226,235,79225,129,7019,869,274.39
1930218,338,38917,428,6876,576,023.38
1931222,647,00021,496,0006,646,000.31
1932217,163,00015,042,0003,946,000.26
1933231,697,78028,002,7996,564,670.23
1934240,663,56536,086,0089,037,861.25
1935252,731,72846,733,3788,730,438.19
1936270,349,32861,961,20011,743,978.19
1937279,844,82573,545,88013,300,870.19

1 All coal-tar resins.

2 Resins from tar acids only.

Source: Compiled from annual reports of the Tariff Commission on dyes and other synthetic organic chemicals in the United States.