PASTES:
See Adhesives for Adhesive Purposes.
Pastes, Razor.
II.—From prepared putty powder (levigated oxide of tin), 3 parts; lard, 2 parts; crocus martis, 1 part; triturated together.
III.—Prepared putty powder, 1 ounce; powdered oxalic acid, 1/4 ounce; powdered gum, 20 grains; make a stiff paste with water, quantity sufficient, and evenly and thinly spread it over the strop, the other side of which should be covered with any of the common greasy mixtures. With very little friction this paste gives a fine edge to the razor, and its action is still further increased by slightly moistening it, or even breathing on it. Immediately after its use, the razor should receive a few turns on the other side of the strop.
PASTE FOR PAPER: See Paper.
PASTES FOR POLISHING METALS: See Soaps.
PASTEBOARD CEMENT: See Adhesives.
PASTEBOARD DEODORIZERS: See Household Formulas.
PASTILLES, FUMIGATING: See Fumigants.
PATINAS: See Bronzing and Plating.
PATENT LEATHER: See Leather.
PEACH EXTRACT: See Essences and Extracts.
PEARLS, TO CLEAN: See Cleaning Preparations and Methods.