A Forester Looks at the Timber Value of Nut Trees
Charles S. Walters, Forestry Department, University of Illinois
What I am going to say will apply mostly to black walnut since it is one of our most valuable timber trees, but it also will apply to other species like hickory, pecan, persimmon. I've never seen papaw or hazel nut large enough for timber, but the Persian walnut has some value and the Chinese chestnut is a fair timber tree. All of these species should be commercially useful if there is sufficient quality and volume involved to warrant a sale.
What I have to say may not apply five years from now. Persimmon used to be the main source of material for golf club heads and shuttles for the textile industry. It no longer is.
Today golf club heads are being made of "Compreg," a wood which has been impregnated with phenolic resins and cured with heat. The resin is similar to Bakelite. Thin sheets of wood are glued together to build up the head, rather than using a single solid piece, and it makes a considerably better golf club head. The developments in wood use are progressing just as in many other fields. What the wood specialists are trying to do is to take low quality material and change it over to a form which is suitable for many uses for which high-quality expensive material is now used. The timber buyer now wants a tree of long, clean, bole with few knots, of large size,—at least 16 inches in diameter at breast height. In short, he wants high quality material.
What I am saying may not apply to nut growing. Foresters grow trees for the wood crop, with nuts as a by-product. The first 16 feet of trunk or the butt log is his main interest. It should be completely free of limbs, knots, and other defects for at least 16 feet. You can use the logs above the butt-cut but they usually produce lower grade material.
You have two courses to follow. You can grow wood either in natural stands or in plantations, and the end product is very little different. It is probably easier to grow a high quality tree in a plantation than in the wild. What can be easier than growing a timber tree in the woodlands? It eventually reaches merchantable size and is harvested. Well, nature can do better if you give her help. Your chances of growing a high quality tree to merchantable size are better in the plantation.
About ten years ago Dr. R. W. Lorenz of our Department made a study of 150 plantations growing on prairie soil in Illinois. Thirty-six were walnut which ranged in age from 22 to 75 years. The one thing we had the most trouble with was determining their ages. One day we stopped at a farm and talked to a farmer, and we asked him when the trees were planted. This man said he could tell us the exact day. "I was a young lad and a neighbor drove by and said, 'Yesterday Abe Lincoln was shot.'" So we had the historical records to determine the age of that particular plantation.
These plantations ranged in number of trees per acre from 46 to 330. The number of trees per acre has a direct influence on the size or diameter growth of the timber tree. An eight by eight spacing, or 680 trees per acre, eventually will be thinned to 200 trees per acre. That gives each tree proper spacing for best height and diameter growth.
The trees ranged in height from about 31 feet to 85, averaging about a foot and a quarter in height each year. The average diameters ranged from about 12 inches to 15 inches. Individual trees, however, ranged up to 24 inches at breast height (4-1/2' above ground level). Each plantation had had very little or no care. If some of them had been cared for, or "managed", their owners would have had a better wood crop—higher quality and higher quantity too.
Now, as to the growth in the managed plantations. We believe it is possible to grow 300 board feet per acre per year. Compared with upland oak, walnut exceeded it in almost all growth factors up to 70 years of age and then they were about the same.
Of the cultural practices, the most important is probably pruning. Sawing off the limbs growing on the trunk makes all wood produced thereafter free of knots. When the trees reach about six inches in diameter, one should select those he is going to call "crop trees"—about 200 of these per acre—and spend his time getting them to timber size and quality. The other trees are removed over a period of several years, so that you finally have only the 200 high quality crop trees left. The reason I suggest starting the pruning when the trees are six inches in diameter, is that that is the size of the veneer core left after the veneer manufacturer has turned the log for the thin sheet of furniture veneer. Remove the limbs and improve the quality so you get a 16-foot log free of limbs and knots. That is what the buyer is looking for.
I know practically nothing about growing trees for a nut crop, but we seem to have something in common in growing trees both for nuts and timber. Just a lot of it is "horse sense", with a few rules of thumb based upon scientific principles. You must give the crop trees space, give them plenty of room to grow. In the woods they start to grow in a dense undergrowth. The young trees soon reach a height where they begin to dominate their neighbors. There you pick the straight, thrifty-growing trees for crop trees and favor them in your thinning and pruning operations. Tree density influences diameter growth of the trees. In thick stands, trees are usually small and spindly. So plant a large number to give the crop trees good form, then thin the plantation carefully to make it grow.
Grazing and fire are very harmful to tree plantations. Most of the plantations we studied were grazed. A good many were burned. I don't think nut growers would periodically burn their stands to improve the nut production. It is the same with growing a crop of wood. Once the livestock begin to trample or compact the soil, tree growth slows down and when that happens it makes the tree more susceptible to attack by insects and fungi.
As to marketing trees, let's assume you have some material you want to sell. The one thing you want to know is, "how much is it worth?" That is like me asking you what my house is worth. I understand there are persons here not only from Illinois and Iowa, but from New York, West Virginia, Ohio, and Kentucky. Prices on wood products vary not only from state to state but also within a state as well. The things you ought to know are the sizes and the grades of the timber that you want to sell, since they determine price. Now, there are publically employed foresters available to help you. They know your local conditions. The manufacturer's markets determine what he can afford to pay you.
For example, we organized some walnut marketing pools in Illinois during the war. I suppose a half million board feet of Illinois walnut was sold for gun stock material. One company was buying most of the product of the pools. Later we found that this company had a market for low grade stump veneer. Most of the other companies would mark a half dozen trees for their stumps. This company would buy 35 to 40 stumps. Every buyer looked at the same quality and quantity of material, since the trees were all marked. In this case, however, the difference in markets determined the price the manufacturer could pay.
Another thing that concerns price is what we call "logging chance" or how easy is it for the buyer to harvest those trees. I imagine anyone buying trees in Pennsylvania would have considerably more difficulty in getting them out than he would in Illinois. The differences in equipment and methods used to harvest the trees all have a bearing on the price paid the timber owner.
Hickory is commonly sold for handle stock. Wood for striking-tool handles has a definite restriction in the specifications on the number of rings allowed per inch of growth. The Federal Government grades handles on the basis of growth rate. From 17 to 22 growth rings per inch is specified. Timber buyers don't want logs grown any slower than 22 rings per inch and those grown a little faster than ten rings per inch may be acceptable.
Now, as to determining the trees to sell. I mentioned a 16-inch diameter limit. A few trees smaller than this with logs shorter than 8 feet in length may be accepted if a large quantity of wood is to be sold. It has to be economically worth while for the buyer to harvest and transport the wood, or he can't afford to buy it. Each buyer of course has a different set of specifications. You ought to measure and mark those trees you want to sell and ask the buyers to bid only on those marked trees.
Buyers like to approach the timber owner with, "You have some timber I can use. I'll give you $100 for what I can use." That is the same approach as if I were to offer $100 for your entire nut crop. You would probably say, "Let's weigh those nuts so we will have a basis for coming to an agreement." It's the same way with timber. There are two ways you can sell your timber. You can either measure your trees and sell on a volume basis, or you can mark certain trees and state to several buyers, "I have marked 25 trees for sale. What is your best offer for them?" Each buyer looks at the same trees, and you have a common denominator for comparing the fairness of each bid.
For example, we had a farmer in Woodford County, Illinois who had walnut trees, wild trees, but growing in a pasture grove. I jotted down the bids that were made. One buyer offered $200 for 27 trees, another bid $225 for 35, a third bid $265 for 40 or $165 for 35, and the last buyer offered $425 for 25 trees. The point I am trying to illustrate is that the farmer, without that extremely high bid, would have been unable to compare the bids because someone bid on 27 trees and someone else on 35 trees. If all buyers had bid on 27 marked trees, he would have had a basis for comparing the bids.
Sell on contract. Farm foresters have simple contract forms which they will give you. The forms can be filled out so that they tell what you agree to do and what the buyer agrees to do. Both parties sign the agreement, so there is less chance for disagreement later.
May I have those slides? (Picture showing large tall tree in dense forest.) This isn't a walnut tree, but I want to show you the kind of condition foresters like to see trees growing under. Nice tall stem, free of any limbs, good diameter. These trees show a rather wide range of age classes. When I talk to my folks about growing timber, they say "70 years is a long time to wait for your money." Here is a tree that started 70 years ago and is ready to be harvested. The crop is sustained yield.
I put this in to show you what we don't like to see. (Picture showing park-like stand of timber.) When these 100 or so trees are gone, there will be no others to replace them. Cattle have grazed this stand to the extent that it will be a long time before any other age classes develop to replace those you see in the picture.
That is a white oak. I told you there weren't many. Good diameter all the way up clear of limbs. When the logger cuts that tree he will have high quality material. The same applies for walnut, hickory, or any other species.
This walnut tree shows you how to mark trees for sale. One mark up here so the buyer knows which tree is designated for cutting, and one down at the bottom so you can assure yourself that that tree was to be sold. It identifies one of the trees you intended to sell; a penalty is involved for cutting any others.
I wanted to show you what a good walnut stump-cut looks like. These trees should be 18 inches or larger in diameter at about two feet above the ground to be worthwhile. The stump will be cut off when it gets to the mill, and peeled for veneer.
This is one of the walnut plantations cut for gun stock material. I put this in to show you how the buyers cut the trees down, and measure off the logs to get the best grade of material. They aren't interested so much in volume as in lumber. They want the best grade of wood, and they want it in that butt log.
I put these in to show poor quality logs that weren't worth taking. This is an open pasture grown tree. No care or attention given it, so the limbs stayed on and grew quite large.
This shows how they load logs with a tractor and chain. This "cross haul" is a trick of the logger's trade. This is the improper way. The tractor was broken down so it took five or six men to load it because they didn't have the tractor. There are some good logs and here are some poor logs.
This is a group of logs, at a railroad siding. Some look small, but at that time—with the market as it was—they could use the smaller logs. You see some of nice length, good form and free of defects. I mentioned metal. Here's a man with an Army mine detector. They tried them out to locate metal. This company uses this mine detector to test all logs for metal content.
Here's what happens. The metal discolors or stains the wood. This tree probably grew in a fence line. The buyers are just a little reluctant to buy them. If they do they cut them off this high so they are pretty sure all fence wire is left in the stump portion.
In this grove of walnut a wire is nailed on every tree. Such a practice ruins the tree.
This shows wasteful practice. This small mill in southern Illinois was buying these short bolts cut from small trees. Be careful that you don't sell trees that are too small and too young. It is like, I suppose, harvesting your walnuts before the kernel develops.
This is the result of fire. That log, from outside appearance, didn't have a blemish. Loggers left this part because it was hollow. The infection developed from a fire scar and rotted out the inside.
This shows the same thing. Fire scarred. Bumping machines used to harvest the nut crop or any defect or injury may result in something like this and decrease the tree's value for timber.
I mentioned hickory. Here are some single-trees that are made out of pecan. Hickory is also used. Hickory grows to a commercial size in southern Illinois but in most states it is too small and knotty. One time the Peoria office of the WPB got a release from Washington indicating that hickory was needed for axe handles. They released it to the newspapers. We answered letters for a month after that. Farmers who had hickory they wanted to sell had to be told that there wasn't enough hickory involved to make it commercially possible to market. In addition, there wasn't a single handle mill in the state at that time.
This is a couple of loads of good walnut logs. They were cut in Illinois and trucked to Indiana to be manufactured into veneer and lumber.
Dr. Colby has asked me if I had any methods of getting rid of stumps. We have worked for five years and we still haven't a method that is economical or easy. We recommend grubbing or burning them out with a small stove, or you can cut them close to the ground and let them rot out. What about the chemicals?—We have worked for a good many years and we have bored stumps until our arms ached, but we haven't found any of them that work.