Bookrack
The material necessary for the illustrated bookrack is as follows:
| 2 | end pieces, 5/8 by 5-1/4 by 6 in. |
| 1 | shelf 5/8 by 5-1/4 by 13 in. |
The shelf is cut rectangular, 5-1/4 in. wide by 14-1/2 in. long. Its two ends should then be provided with tenons 3/8 in. thick by 4-1/4 in. wide, and extending out 1/4 inch.
A Bookrack That can be Made in Any Wood to Match Other Furniture
The end pieces, after being cut to the given dimensions, are marked off and cut out for mortises to fit the shelf tenons.
In assembling the parts, they are glued in place, and clamped with hand screws until the glue has set. Any of the good mission stains, properly applied, will give a finished appearance to the bookrack.