It will be found a great convenience, as well as a saving, to keep the following list of supplies on hand, so that if any of these parts should break or wear out they could be renewed at once and machine would not have to stand idle until they could be procured from factory or stock rooms.
The expense will be small, but the time saved by having these parts at hand in an emergency will more than pay for the outlay:
| | | Part No. | Sheet. |
|---|
| 3 | Line delivery lever link springs | 216 | B |
| 2 | Second elevator starting springs (In ordering state if long or short spring is wanted.) | 238 | B |
| 1 | Spaceband lever pawl hook (State if old or new style.) | 98 | B |
| 10 | Pot cam roller anti-friction rollers | 300 | B |
| 1 | Automatic stop catch | 17 | BB |
| 1 | Ejector lever adjustable pawl assembled | 165 | BB |
| 2 | Line delivery carriage long fingers (L H) | 209 | D |
| 2 | Assembling elevator gate rail pawls | 434 | D |
| 2 | Assembling elevator back rail pawls | 77 | D |
| 4 | Spaceband box pawls | 186 | D |
| 4 | Assembling elevator matrix detaining plate, back | 100 | D |
| 4 | Assembling elevator matrix detaining plate, front | 433 | D |
| 10 | Assembler chute rails (back) | 15 | D |
| 10 | Assembler chute rails (front) | 16 | D |
| 10 | Assembler stars | 6 | D |
| 1 | Assembler glass (small) | 20 | D |
| 1 | Assembler star shaft | 7 | D |
| 1 | Assembler pinion friction disk | 315 | D |
| 1 | Assembler pinion friction spring | 316 | D |
| 3 | Assembler star pinion friction nuts | 317 | D |
| 3 | Assembler chute springs | 459 | D |
| 3 | Assembler matrix catch springs | 18 | D |
| 1 | First elevator back jaw | 107 | E |
| 4 | First elevator back and front jaw pawl levers | 121 | E |
| 4 | First elevator back jaw pawls | 122 | E |
| 4 | First elevator front jaw pawls | 123 | E |
| 6 | First elevator front jaw pawl springs (These last four not used on latest machines.) | 126 | E |
| 2 | Knife wiper bar springs | 171 | E |
| 1 | Knife wiper bar guide | 312 | E |
| 1 | Pot lever spring | 27 | F |
| 1 | Back knife (State if old or new style.) | 254 | F |
| 1 | Distributer box front plate upper rail | 84 | G |
| 1 | Distributer box back plate upper rail | 85 | G |
| 1 | Distributer box back plate lower rail | 86 | G |
| 1 | Distributer box front plate lower rail | 199 | G |
| 1 | Second elevator adjusting spring | 183 | G |
| 2 | Second elevator bar springs | 67 | G |
| 1 | Distributer box bar, assembled | 212 | G |
| 1 | Distributer box matrix lift | 91 | G |
| 2 | Keyboard keybar springs, upper case | 234 | H |
| 2 | Keyboard keybar springs, lower case | 219 | H |
| 6 | Keyboard cam and yokes, assembled (State if old or new style.) | 201 | H |
| 2 | Keyboard cam yoke trigger hinge rods | 145 | H |
| 12 | Escapement verges, assorted | 8 | J |
| 6 | Escapement verge pawls, assorted | 10 | J |
| 6 | Escapement verge springs | 11 | J |
| 1 | Escapement verge hinge rod | 9 | J |
| 25 | Flat-head screws, assorted | | |
| 25 | Round-head screws, assorted | | |