THE FORMS OF IRON AND MANGANESE DEPOSITED AT ORDINARY TEMPERATURES.
The mineralogical forms in which iron and manganese are deposited from solution in nature at ordinary temperatures depend on the conditions of air and water, whether of an oxidizing or a reducing nature, and on the character of the associated organic and inorganic matter either in solution or on the floor of the sea, lagoon or bog in which the deposition occurs.[18] There are four principal methods by which iron and manganese are precipitated in nature from surface waters:
(1) By oxidation, as in the case of the precipitation of hydrous oxides and in the precipitation of the carbonate by the partial oxidation of more complex organic salts.[19]
(2) By reduction, as in the precipitation of sulphide of iron by the reduction of sulphate of iron.
(3) By gaseous or soluble precipitants, as in the precipitation of sulphide of iron by the action of sulphuretted hydrogen or a soluble sulphide on a soluble salt of iron, and as in other cases to be mentioned later.
(4) By replacement of carbonate of lime or some other substance. Different forms are precipitated by these different methods.
Iron at ordinary temperatures is usually deposited from solution as the hydrous sesquioxide, the carbonate, the sulphide or the hydrous silicate of iron and potash known as glauconite. Manganese under similar conditions is deposited as the hydrous oxide[20] or as the carbonate, and possibly sometimes, though very rarely, as sulphide.
When solutions of organic or inorganic salts of iron and manganese are freely exposed to the action of air, as in shallow or rapidly moving streams, or in lakes and some bogs, they are quickly oxidized and both may be deposited as more or less hydrous oxides. In many bogs, however, the metals may be precipitated as hydrous oxide on the surface where oxidizing agencies predominate, but when these oxides sink and come into contact with decaying organic matter, free from the active oxidizing influences of the air, they may be reduced to carbonates.
The carbonates of iron and manganese may be precipitated when the solutions containing them are protected from oxidation by a reducing agent, such as decaying organic matter, or by being far removed from the air. Carbonate of manganese, however, is a much more stable compound than carbonate of iron, and the oxidizing conditions are often sufficiently strong to cause the deposition of iron as hydrous sesquioxide and not strong enough to change the manganese from its carbonate form. It is not uncommon, therefore, to have iron deposited in one place as hydrous sesquioxide, and manganese carried further on and deposited as carbonate, or even under special conditions deposited as carbonate with the hydrous sesquioxide of iron. Fresenius[21] has shown that the warm springs of Wiesbaden, which contain iron and manganese among their other mineral constituents, deposit iron in the form of hydrous sesquioxide, while manganese is carried on further in solution and deposited as carbonate. In this behavior, therefore, we have the first striking difference in the deposition of iron and manganese, and it will be further discussed later on.
The sulphides of iron and manganese differ very much in their nature and mode of occurrence. Iron is frequently deposited as sulphide, but manganese rarely occurs in that form, and when it does it is always in very small quantities. Iron forms several sulphides in nature: pyrite (FeS2), marcasite (FeS2),[22] pyrrhotite (Fe11S12), troilite (FeS) and numerous other more complex compounds unnecessary to enumerate here. Pyrite is the commonest form of iron sulphide, and occurs in rocks of all ages, from Archean to Recent. It is formed in nature by the action of soluble sulphides or sulphuretted hydrogen on soluble salts of iron, and also by the reduction of sulphate of iron by organic matter or other reducing agents. Manganese forms two[23] sulphides, alabandite (MnS) and hauerite (MnS2). Both minerals are very rare, and so unstable that they rapidly oxidize on exposure. Alabandite is the less rare form, and usually occurs as a subordinate constituent of certain metalliferous veins or allied deposits.
Though the sulphides of manganese are easily oxidized, they are not so unstable that, had they ever been formed in considerable quantities in sedimentary deposits, they would, even at considerable depths, have left no trace of their former presence. Moreover, the sulphide of manganese, as produced artificially,[24] is soluble in certain organic acids, notably acetic, and, as the conditions for the deposition of sulphides of metals in sedimentary deposits generally require the presence of organic matter, it is not improbable that some of the acids given off by such matter would be capable of dissolving sulphide of manganese. Here, then, is one reason why manganese might not be deposited as sulphide under some conditions which would cause the precipitation of sulphide of iron. Moreover, the artificial formation of sulphide of manganese (alabandite) in the laboratory is brought about most easily at high temperatures. It has also been noted that when manganese, in the form of the alloys spiegeleisen and ferro-manganese, is added to molten steel, it bodily removes a part of the sulphur; and it is thought by some metallurgists, that sulphide of manganese is formed and carried into the slag.
These and other indications of the more easy transition of manganese into the form of sulphide at high rather than at low temperatures afford another cause which might prevent sulphide of manganese from being formed in sedimentary deposits, for such deposits are usually laid down at ordinary temperatures. On the other hand, they also afford a cause which might lead to the deposition of the sulphide of manganese in certain metalliferous veins and other deposits, where the temperature at the time of deposition may have been high.
In many of the silver and lead deposits of the Rocky Mountains manganese oxides occur with the superficial oxidation products of the sulphides of other metals, and it has often been suggested that the manganese also was originally in the form of sulphide. This may be true in some cases, for alabandite has been found in a few metalliferous deposits in Colorado, Mexico, Germany, Peru and elsewhere, but in most cases, at least in the Rocky Mountains, when the level is reached at which the oxidized forms of lead, zinc, iron and other metals pass into sulphides, the manganese passes into carbonate or silicate, and remains in one or both of those forms to all depths that have been reached.
In the deposition of iron and manganese as sulphide, therefore, there is a most marked difference of behavior, and here again is a good cause for the separation of the two substances in sedimentary rocks, as will be more fully explained below.
Iron is often deposited in sedimentary formations as the hydrous silicate of iron and potash known as glauconite, and composes the mass of the large greensand beds common in Cretaceous and Tertiary strata; but manganese is not found in an exactly similar condition.[25] Here again, therefore, is an important difference in the modes of deposition of iron and manganese, which also will be mentioned again.
It will thus be seen that while some of the forms in which iron and manganese are deposited are the same, others differ very widely, and even similar forms are often deposited under different conditions. It is doubtless to these various forms and conditions of deposition that the alternate association and separation of iron and manganese in nature are due.