Practical House, Wagon and Automobile Painter / including sign painting, and valuable hints and recipes

by W. F. White

PAINTING BLINDS.

When painting a blind never turn it upon edge when cutting in the inside of the rail, because the paint will be likely to run into the pivot-holes and stick the slats. When you set a blind up to dry, set the bottom end up, and be sure to have the slats lie flat side up. Why? Because the bottom end of the blind when hung is more apt to drag on the window sill than the top end is to touch the jam above. If set bottom end up, that end will dry solid and if there are any sags it will be at the top. Keep the slats flat side up to avoid flat edges.