Iron Mordants
Ferrous sulphate, iron vitriol, or copperas, as it is commonly known, forms pale green crystals, which on exposure to air lose water, and crumble down to a white powder. It is very soluble in both cold and hot water, but the solutions oxidize very rapidly, turning yellowish, and should therefore be used immediately. Care must be taken that a good quality of iron vitriol be used for the mordant, otherwise very unsatisfactory results will be obtained.
Ferrous acetate is prepared in a manner similar to the aluminum acetate, and is occasionally employed instead of the ferrous sulphate. Inasmuch, however, as the solution of ferrous acetate is very easily oxidizable when exposed to the air, a more stable form is used, and this comes on the market as iron pyrolignite or iron liquor. This can be prepared by dissolving iron in crude acetic or pyroligneous acid, or by treating a solution of iron sulphate with calcium pyrolignite. Iron liquor is really a solution of ferrous acetate that contains certain organic impurities which prevent, or rather, considerably retard the oxidation of the iron salt, but which in no way interfere with its mordanting properties. The commercial product can be had in various concentrations, but 10 degrees Beaumé is the most usual and most convenient.