Handbook for Light Artillery

by A. B. Dyer

3. Replace sleeve (small end to the front) and place group of barrels in frame.

4. Replace cocking-cam piston and spring, place lock-cam cylinder in interior of breech-casing, and put in screws.

5. Replace hopper and put in hinge-pin.

6. Replace breech-casing and put in screws.

7. Replace traversing apparatus; place head of elevating-screw in its seat in traversing apparatus, and put elevating-screw with sleeve in place.

8. Screw in elevating-screw clamp as far as it will go and put in clamp-screw.

9. Replace adjusting-screw with set-nut and put on cover.

10. Replace worm-gear and spline-screw.

11. Replace sleeve, worm, and crank-shaft, and put steady-pin in worm.