Fig. 211.—Pattern of Canopy-top.
The Seat-arms are pieces of bent wire, with their ends stuck into holes in the canopy uprights and front edge of the seat.
The Steering-wheel is a section of a spool 1/8 inch thick, and is glued upon the end of a pencil or a stick. Run the lower end of the pencil through a hole in the bottom of D ([Fig. 210]). For
The Levers, fasten two small sticks to the end of the bottom piece D with small staples.
[CHAPTER XII]
A HOME-MADE TOY SHOOTING GALLERY
