DEFECTIVE PAN BEARING.
This model was put on the market and sold for some time and seemed to be a very good trap. It was discovered, however, that the bearing of the pan was too low down for a delicate set and also sometimes caused trouble by freezing in mud.
THE ALL STEEL.
This trap was at one time thought to be good and was tried by many trappers. It was found, however, to be very faulty in many respects. The bearing of the pan lay flat in the mud and would freeze. The setting device lacked any kind of adjustability and might either go off so hard that nothing could spring it or so easily that it would not stay set at all. The jaws which were made of thin sheet steel were not durable.