FIG. 14. SIMPLE SUPPORT FOR DRESSED HOG.
HOW TO CUT UP A HOG.
With a sharp ax and a sharp butcher’s knife at hand, lay the hog on the chopping bench, side down. With the knife make a cut near the ear clear across the neck and down to the bone. With a dextrous stroke of the ax sever the head from the body. Lay the carcass on the back, a boy holding it upright and keeping the forelegs well apart. With the ax proceed to take out the chine or backbone. If it is desired to put as much of the hog into neat meat as possible, trim to the chine very close, taking out none of the skin or outside fat with it. Otherwise, the cutter need not be particular how much meat comes away with the bone. What does not go with the neat meat will be in the offal or sausage, and nothing will be lost. Lay the chine aside and with the knife finish separating the two divisions of the hog. Next, strip off with the hands the leaves or flakes of fat from the middle to the hams. Seize the hock of the ham with the left hand and with the knife in the other, proceed to round out the ham, giving it a neat, oval shape. Be very particular in shaping the ham. If it is spoiled in the first cutting, no subsequent trimming will put it into a form to exactly suit the fastidious public eye. Trim off the surplus lean and fat and projecting pieces of bone. Cut off the foot just above the hock joint. The piece when finished should have nearly the form of a regular oval, with its projecting handle or hock.
With the ax cut the shoulder from the middling, making the cut straight across near the elbow joint. Take off the end ribs or “spare bone” from the shoulder, trim the piece and cut off the foot. For home use, trim the shoulder, as well as the other pieces, very closely, taking off all of both lean and fat that can be spared. If care is taken to cut away the head near the ear, the shoulder will be at first about as wide as long, having a good deal of the neck attached. If the meat is intended for sale and the largest quantity of bacon is the primary object, let the piece remain so. But if it is preferred to have plenty of lard and sausage, cut a smart strip from off the neck side of the shoulder and make the piece assume the form of a parallelogram, with the hock attached to one end. Trim a slice of fat from the back for lard, take off the “short ribs,” and, if preferred, remove the long ribs from the whole piece. The latter, however, is not often done by the farmers. Put the middling in nice shape by trimming it wherever needed, which, when finished, will be very much like a square in form, perhaps a little longer than broad, with a small circular piece cut out from the end next the ham.
The six pieces of neat meat are now ready for the salter. The head is next cut open longitudinally from side to side, separating the jowl from the top or “head,” so-called. The jawbone of the jowl is cut at the angle or tip and the “swallow,” which is the larynx or upper part of the windpipe, is taken out. The headpiece is next cut open vertically and the lobe of the brain is taken out, and the ears and nose are removed.
The bone of the chine is cut at several places for the convenience of the cook, and the task of the cutter is finished. Besides the six pieces of neat meat, there are the chine, souse, jowl, head, fat, sausage, two spare and two short ribs and various other small bits derived from each hog. A good cutter, with an assistant to carry away the pieces and help otherwise, can cut out from 50 to 60 hogs in a day.