In order to do any satisfactory work on quadrupeds the taxidermist makes use of a bath or pickle of some sort for keeping skins in a wet state. This pickle sets the hair and in a measure tans the skin, reducing its liability to shrinkage and rendering it less desirable pasturage for insects.
All furred skins of any size should be immersed in this for a time before mounting, and may be kept in it for months or years without injury. If you have time to skin an animal properly the skin may be dropped in the pickle jar and in a day, week, or month be better fit for final mounting than at first.
For the first few days it is necessary to move it about every day so all parts may be exposed to the action of the pickle. The form of pickle which I have found most helpful is:
| Water | 1 | gal. | |
| Salt | 1 | qt. | |
| Sulphuric acid (measure) | 1 | oz. |
Bring to boiling point to dissolve the salt. Allow to cool before stirring in the acid. When cold is ready for use.
When keeping skins in a wet state a long time I would prefer to use:
| Water | 1 | gal. | |
| Salt | 1 | qt. | |
| Alum | 1 | pt. |
Boil to dissolve salt and alum; use like preceding.
If skins are to be kept some time they should, after a preliminary pickling, be put in new, fresh pickle and it should be occasionally tested with a salinometer and kept up to the original strength. Dirty and greasy pickle should be thrown away, but if clean and of low strength it can be brought up by adding new pickle of extra strength. It will do no hurt if more salt, even a saturated solution, is made of either of the foregoing.
While the salt and alum or acid pickle will keep our animal skins safely and in a relaxed condition ready for further preparation at any time, it will not answer for bird skins. For this we have a solution for keeping bird skins soft: