HUMBER
FORK CROWN.
Front-fork construction in 1898 shows a decided reversion to the old type used on the “[Ordinary],” where all the front forks were of the arched crown construction. The makers of the Rambler, who also built an “[Ordinary],” have persistently and consistently used this arched fork construction, and to them must be given the credit for its reintroduction. It has not only taken the Western makers by storm, but it has captured the fancy of very nearly all the Eastern makers. A careful census of over one hundred makers shows that fully 75 per cent. of them are using some form of arched crown construction, but even in this arched-fork construction there are a few variations. The Rambler, the originators of it, use it with outside spearhead reinforcements. A notable departure in this form of construction is shown by the illustration as one patented by Fauber, who is also the inventor of the one-piece crank axle. He makes the front fork, crown and stem of two pieces of D-shape tubing, bent to shape, and brazed together the full length of the stem, one of the most taking and strongest forms of stem connections known. Some of the makers use a drop-forged arched crown, to which the stem and fork sides are brazed. The Western Wheel Works, the makers of the [Crescent], who first introduced sheet steel stampings in bicycle construction, and still continue to use them, make their fork crown of three pieces drawn and stamped together. A few of the makers still continue to use the good old-fashioned two-piece flat plate crown, which was invented by Thomas Humber a quarter of a century ago; and among the distinctive fork crowns to be noted are the “[Columbia],” “[Liberty],” “[Orient],” “[Union],” “Victor” and “[Lyndhurst].” The [World and Adlake] use three-piece flat crowns. The Victor fork sides are remarkable, because for many years past all the great makers have invariably advertised their fork sides as being made of cold-drawn tubing, flattened to an oval shape. The Victor people claim, however, that for years past they have made their fork sides of crucible sheet steel, which are brazed together and reinforced by a steel wire running the entire length of the rear end, and are brazed to a solid forged steel crown. But this is the first season they have announced in their catalogues that they use it.
MONARCH
FORK CROWN.
Another popular method is to make front forks of continuous tapered one-piece tubing, which is brazed to the fork crown. The majority of forks of this shape, however, are of D-shape section on the inside and flat on the outside. The most prominent people using this method of construction are the makers of the “Union,” used by Jimmie Michael in all his rides, an illustration of which is given herewith.
One-piece forks are tapered as follows: Sixteen-gauge at the top where the crown sets, 20-gauge in the middle of the fork side and 18-gauge at the fork or axle ends.
In the earlier forms of fork construction some peculiarities were noted; the Warwick Company, for instance, made front forks that were perfectly vertical. Now all forks are built with considerable rake to them. On some of the ordinaries forks were built known as the “double hollow” fork, being fluted. Variations in this consisted of two small tubes brazed together. The rear forks of some of the ordinaries first built were known as semi-hollow, being really nothing but a piece of sheet steel having flanged edges, and on some of the early types of old velocipedes built the fork was only on one side of the wheel and the elevating influence of the stage was felt at that early period of its history, because Hanlon, the actor, in 1868 took out a patent for a bifurcated fork.