KNOTTING: 1. Keep the foundation yarn secure and in place by using T-pins in the overhand knot at either end. 2. Keep leader taut and straight on an angle or parallel to the foundation yarn. 3. Tie knots tightly to cover leader. 4. Secure with pins to keep accurate measurement. (Use the one inch squares as a gauge.)
Learn all knots on sample piece before beginning, making sure to acquire the right tension. This will enable you to identify the knots.
Five knots are used in this booklet. They are basically the same differing mainly in direction. 1. Reversed Double Half Hitch (R D H H) as shown in [figure #1], used for mounting lengths onto foundation yarn. Fold length in half, tuck looped end over foundation yarn and pull toward you, tuck loose ends into loop and tighten. 2. Overhand Knot (O H K) as shown in [figure #2]. Hold length in left hand, with right hand bring it up and over towards the left through loop formed, tighten. 3. Vertical Half Hitch (V H H) as shown in [figure #3]. Hold one length in left hand, with right hand bring next length around and between the two lengths (counts as one knot). Bring left length around right and between the two lengths. Continue for the number of knots indicated. 4. Diagonal Double Half Hitch (D D H H) as shown in [figure #4]. Working from left to right, the leader (length on which the knots are tied) is held in the right hand. Each length is knotted onto it in the same manner as the first knot of the V H H two times. The leader is held taut and on a downward angle. Working from right to left the leader is held in the left hand. 5. Horizontal Bar or Horizontal Double Half Hitch (H B or H D H H) as shown in [figure #5]. Holding the leader taut and parallel to the foundation yarn work as D D H H.
Asterisk...*. This indicates that the directions immediately following are to be repeated the given number of times in addition to the ones already given. Thus “repeat from * 3 times” means 4 patterns in all.
Belt
Material Required:
AMERICAN THREAD “Aunt Lydia’s” Heavy Rug Yarn. 2—70 Yd. Skeins color A. 1 Crochet Hook Size H or any size hook which will result in stitch gauge below. Gauge: 1 pattern = 1 inch. Suggested Color Scheme: A—Lilac. Measurements: Waist: Fits All Sizes. Width: Approx. 4¼ inches.
With A and Size H hook, ch 15.
ROW 1: Dc in 4th st from hook, dc in next 2 sts, working over side of last 3 sts, insert hook in space between ch at beg and first dc, work a sc pulling loops to width of the 3 dc, * skip next st of ch, dc in next 3 sts, insert hook in space between these 3 sts and sts of previous group, work a sc, repeat from * once, dc in next st, turn.
ROW 2: Ch 3, skip 1 st, dc in next 3 dc, taking care not to work over the loop of sc of row below, insert hook in space between ch at beg and first dc, work a sc over the 3 dc just made, * skip next st, dc in next 3 dc, work a sc over side of these 3 sts, repeat from * once, dc in next st. Repeat Row 2 for waist measurement minus 2 inches.