I believe the true road to preëminent success in any line is to make yourself master in that line. I have no faith in the policy of scattering one's resources, and in my experience I have rarely if ever met a man who achieved preëminence in money-making—certainly never one in manufacturing—who was interested in many concerns. The men who have succeeded are men who have chosen one line and stuck to it. It is surprising how few men appreciate the enormous dividends derivable from investment in their own business. There is scarcely a manufacturer in the world who has not in his works some machinery that should be thrown out and replaced by improved appliances; or who does not for the want of additional machinery or new methods lose more than sufficient to pay the largest dividend obtainable by investment beyond his own domain. And yet most business men whom I have known invest in bank shares and in far-away enterprises, while the true gold mine lies right in their own factories.
I have tried always to hold fast to this important fact. It has been with me a cardinal doctrine that I could manage my own capital better than any other person, much better than any board of directors. The losses men encounter during a business life which seriously embarrass them are rarely in their own business, but in enterprises of which the investor is not master. My advice to young men would be not only to concentrate their whole time and attention on the one business in life in which they engage, but to put every dollar of their capital into it. If there be any business that will not bear extension, the true policy is to invest the surplus in first-class securities which will yield a moderate but certain revenue if some other growing business cannot be found. As for myself my decision was taken early. I would concentrate upon the manufacture of iron and steel and be master in that.
My visits to Britain gave me excellent opportunities to renew and make acquaintance with those prominent in the iron and steel business—Bessemer in the front, Sir Lothian Bell, Sir Bernard Samuelson, Sir Windsor Richards, Edward Martin, Bingley, Evans, and the whole host of captains in that industry. My election to the council, and finally to the presidency of the British Iron and Steel Institute soon followed, I being the first president who was not a British subject. That honor was highly appreciated, although at first declined, because I feared that I could not give sufficient time to its duties, owing to my residence in America.
As we had been compelled to engage in the manufacture of wrought-iron in order to make bridges and other structures, so now we thought it desirable to manufacture our own pig iron. And this led to the erection of the Lucy Furnace in the year 1870—a venture which would have been postponed had we fully appreciated its magnitude. We heard from time to time the ominous predictions made by our older brethren in the manufacturing business with regard to the rapid growth and extension of our young concern, but we were not deterred. We thought we had sufficient capital and credit to justify the building of one blast furnace.
The estimates made of its cost, however, did not cover more than half the expenditure. It was an experiment with us. Mr. Kloman knew nothing about blast-furnace operations. But even without exact knowledge no serious blunder was made. The yield of the Lucy Furnace (named after my bright sister-in-law) exceeded our most sanguine expectations and the then unprecedented output of a hundred tons per day was made from one blast furnace, for one week—an output that the world had never heard of before. We held the record and many visitors came to marvel at the marvel.
It was not, however, all smooth sailing with our iron business. Years of panic came at intervals. We had passed safely through the fall in values following the war, when iron from nine cents per pound dropped to three. Many failures occurred and our financial manager had his time fully occupied in providing funds to meet emergencies. Among many wrecks our firm stood with credit unimpaired. But the manufacture of pig iron gave us more anxiety than any other department of our business so far. The greatest service rendered us in this branch of manufacturing was by Mr. Whitwell, of the celebrated Whitwell Brothers of England, whose blast-furnace stoves were so generally used. Mr. Whitwell was one of the best-known of the visitors who came to marvel at the Lucy Furnace, and I laid the difficulty we then were experiencing before him. He said immediately:
"That comes from the angle of the bell being wrong."
He explained how it should be changed. Our Mr. Kloman was slow to believe this, but I urged that a small glass-model furnace and two bells be made, one as the Lucy was and the other as Mr. Whitwell advised it should be. This was done, and upon my next visit experiments were made with each, the result being just as Mr. Whitwell had foretold. Our bell distributed the large pieces to the sides of the furnace, leaving the center a dense mass through which the blast could only partially penetrate. The Whitwell bell threw the pieces to the center leaving the circumference dense. This made all the difference in the world. The Lucy's troubles were over.
What a kind, big, broad man was Mr. Whitwell, with no narrow jealousy, no withholding his knowledge! We had in some departments learned new things and were able to be of service to his firm in return. At all events, after that everything we had was open to the Whitwells. [To-day, as I write, I rejoice that one of the two still is with us and that our friendship is still warm. He was my predecessor in the presidency of the British Iron and Steel Institute.]