I said that each type-setter has his number. We will suppose that this man, next to us, is number “twenty-five.” Then he is provided with a great many pieces of metal, just the width of a column, with his number made on them—thus: “TWENTY-FIVE.” Every time he sets a new bit of copy, he puts one of these “twenty-fives” at the top; and when all the bits of type in the long trough are slid together the type is broken up every two inches or so, with “twenty-five,” “thirty-seven,” “two,” “eleven,” and so on, at the top of the bits which the men, whose numbers these are, have set. When a proof of the article is taken, these several numbers appear; and, if there are mistakes, it appears from these numbers, what type-setters made them, and they have to correct them. Also, of each article, a single “proof” is taken on colored paper. These colored paper “proofs” are cut up the next day, and all the pieces marked “twenty-five,” “thirty-seven,” and so on, go to the men who have these numbers, and when pasted together show how much type, number “twenty-five,” “thirty-seven,” and so on, are to be paid for setting—for the type-setters are paid according to the amount of type which they set.
FAC-SIMILE OF “PROOF” SHOWING “TAKES.”
As fast as the proofs are taken they go into the room of the proof-readers to be corrected. The bits of copy are pasted together again, and one man holds the copy while another reads the proof aloud. The man holding the copy notices any points in which the proof does not read like the copy, and tells the man who is reading it. The man reading it corrects the variations from copy, and corrects all the other mistakes which he can discover, and then the type-setters have to change the type so as to make it right. There the proof readers sit hard at work, reading incredibly fast, and making rapid and accurate corrections; then the “copy” is locked up, and no one can get at it, except the Managing Editor or Editor-in-Chief gives an order to see it. This precaution is taken, in order to make certain who is responsible for any mistakes which appear in the paper—the editors, or the type-setters.
By this time it is nearly midnight, and the editors, type-setters, etc., take their lunches. They either go out to restaurants for them, or have them sent in—hot coffee, sandwiches, fruit, etc.—a good meal for which they are all glad to stop.
And now the Foreman of the type-setters sends to the Night Editor that matter enough is in type to begin the “make-up”—that is, to put together the first pages of the paper. There the beautiful type stands, in long troughs, all corrected now, the great numbers of the type-setters removed from between the bits of type—the whole ready to be arranged into page after page of the paper. So the Night Editor makes a list of the articles which he wants on the page which is to be made up; the Foreman puts them in in the order which the Night Editor indicates; the completed page is wedged securely into an iron frame, and then is ready to be stereotyped.
A NEWS-DEALER.
The room of the stereotypers is off by itself. There is a furnace in it, and a great caldron of melted type metal. They take the page of the paper which has just been made up; put it on a hot steam chest; spat down upon the type some thick pulpy paper soaked so as to make it fit around the type; spread plaster of Paris on the back, so as to keep the pulpy paper in shape; and put the whole under the press which more perfectly squeezes the pulpy paper down upon the type, and causes it to take a more perfect impression of the type. The heat of the steam chest warms the type, and quickly dries the pulpy paper and the plaster of Paris. Then the pulpy paper is taken off, and curved with just such a curve as the cylinders of the printing-press have, and melted type metal is poured over it, which cools in a moment; when, lo, there is a curving plate of type-metal just like the type! The whole process of making this plate takes only a few minutes. They use such plates as these, rather than type, in printing the great papers chiefly for reasons like these: 1. Because plates save the wear of type; 2. Because they are easier handled; 3. Because they can be made curving, to fit the cylinders of the printing presses as it would be difficult to arrange the type; 4. Because several plates can be made from the same type, and hence several presses can be put at work at the same time printing the same paper; 5. Because, if anything needs to be added to the paper, after the presses have begun running, the type being left up-stairs can be changed and new plates made, so that the presses need stop only a minute for the new plates to be put in—which is a great saving of time.