REPLACEMENT FOR PREVIOUS MODEL NASH SIXES
The Model "S" Marvel Carbureter is interchangeable with the Model "K" Marvel Carbureter, which was standard equipment on the 1922 and 1923 Nash Sixes of the early 691 series.
The previous series 681 Nash Sixes of 1921, 1920, and 1919, which were equipped with the Model "E" Marvel Carbureter as standard equipment, can be very greatly improved by the installation of the Model "S" carbureter, exhaust damper body assembly necessary for same, and the hot air stove assembly that goes with this installation.
Following is the complete Parts Price List of the Model "S" carbureter, damper body assembly and stove parts for same. Notice is called to the fact again that the damper body and stove parts are not needed on the early 691 series of 1922 and 1923.
REPLACEMENT PARTS PRICE LIST
For 1919–1922 Series 681 Nash Sixes
| 10-579 | Carbureter and Heat Equipment Complete | $30.00 | |
| Consisting of the Following Parts: | |||
| Part No. | Name | Price | |
| 10-580 | Carbureter Assembly | 1 | 22.00 |
| 128-506 | Damper Body and Stove Assembly | 8.00 | |
| 15-16 | 10×24×3⁄8 F.H. Machine Screw | 1 | .05 |
| 15-43 | 1⁄4×20×1⁄2 Std. Square Head Set Screw | 2 | .05 |
| 15-53 | 5⁄16×18×2-1⁄2 Cap Screw | 1 | .05 |
| 15-54 | 3⁄8×16×1 Standard Square Head Set Screw | 2 | .05 |
| 17-14 | Exhaust Shut-off Valve Connecting Rod | 1 | .10 |
| 17-15 | Damper Connecting Rod (Main Damper) | 1 | .20 |
| 19-2 | Exhaust Manifold Damper Fly | 1.00 | |
| 19-9 | Warm Air Stove Damper Fly | 1 | |
| 20-31 | Stove Damper Fly Shaft | 1 | .10 |
| 24-31 | Damper Fly Shaft Spring | 1 | .10 |
| 24-43 | Stove Damper Fly Spring | 1 | .15 |
| 28-4 | Connecting Rod Swivel | 1 | .25 |
| 62-5 | Escutcheon Pin | 1 | .05 |
| 74-3 | Exhaust Shut-off Valve | 1 | .15 |
| 78-4 | 5⁄16 Plain Washer | 1 | .05 |
| 81-26 | 3⁄8×16 Check Nut | 2 | .05 |
| 82-1 | 1⁄16×1⁄2 Cotter Pin | 2 | .05 |
| 82-3 | 1⁄8×3⁄4 Cotter Pin | 3 | .05 |
| 100-16 | Warm Air Stove | 1 | |
| 100-17 | Warm Air Stove | 1 | |
| 100-520 | Warm Air Stove Assembly | 1 | 1.50 |
| 122-503 | Damper Lever and Shaft Assembly | 1 | 1.00 |
| 122-504 | Exhaust Shut-off Lever and Shaft Assembly | 1 | .40 |
| 123-1 | Heat Tube Support Ring | 1 | .10 |
| 123-3 | Damper Body Packing Stop Ring | 1 | .10 |
| 123-4 | Exhaust Damper Body Packing Ring | 1 | .10 |
| 124-1 | Heat Tube Collar | 4 | .20 |
| 125-1 | Damper Shaft Spring Seat | 2 | .10 |
| 126-2 | Heat Tube Outlet | 1 | .50 |
| 126-12 | Heat Tube Inlet | 1 | .50 |
| 127-1 | Heat Tube Packing | 4 | .10 |
| 127-2 | Exhaust Damper Body Packing, per foot | 1 | .10 |
| 128-3 | Exhaust Damper Body | 1 | 3.00 |
| 128-506 | Exhaust Manifold Damper Body and Stove Assembly | 1 | 8.00 |
| 163-1 | Choker Rod Extension | .10 | |
MARVEL CARBURETER DISTRIBUTORS
Distributors who carry a complete stock of Carbureters and Parts and who are prepared to overhaul and rebuild Carbureters: