Fill both shuttles. The plain with No. 8. The figured with No. 18. Pin No. 2.
Tie these cottons together, and with the plain shuttle thread round the little finger work 6 D. Begin an oval with the figured shuttle, 2 R D. (L, 2 R D 9 times) draw up tight. * With the plain shuttle thread round the little finger, 6 D. Begin an oval, with the figured shuttle, 2 R D (L, 2 R D 3 times) join to the 6th L of last oval, 2 R D (L, 2 R D 5 times) draw tight, and Repeat 10 times from *. Work 6 D, as before, and Begin the 12th oval, 2 R D (L, 2 R D 3 times) join to the 6th L of last oval; 2 R D, L, 2 R D join to the 4th L of the 1st oval; 2 R D (L, 2 R D 3 times) draw tight; and fasten off by drawing the fine cotton through the space near the 1st stitch, and tying.
To work in the centre.
Take a piece of No. 8 cotton; draw it, in loops, through each of the 12 centre loops of the ovals, and pass the other end of this cotton 3 times through each loop—fasten off.
For the foundation of the vandykes.
Fill the plain shuttle with No. 8, and measure off 2 lengths of 1½ yards each; tie the 3 ends together. With the 1st length twisted round the little finger work 2 D, L, 2 D, then put the second round the little finger, leave a little space, and work 2 R D, L, 2 R D; repeat until there are 66 Ls on each side. Fasten it neatly into a circle, by untying the first knot and sewing the threads to each other.
To unite this strip to the centre-piece.
1st. Row. Fill both shuttles and join. With the figured shuttle thread round the little finger make a L with the plain shuttle thread; 3 D join to any L of the strip, 3 D; L, with the plain shuttle thread; 3 D join to the 1st space to the right of the last join. 3 D (L with the plain shuttle thread; 3 D join to the next L to the right; 3 D 4 times). Begin an oval, with the figured shuttle, 3 D join to the next 2 Ls of the strip; 3 D draw tight; 3 D join to the next L of the strip; 3 D tie to the last L of plain shuttle thread; 3 D join to the next L of the strip; 3 D tie to the last L, but one, of plain shuttle thread (3 D join to the next L of the strip; 3 D, L, with the plain shuttle thread; twice); 3 D join to the space, next the last L to which you joined, 3 D. Repeat this row 6 times, or until all the Ls of the strip have been joined in.
In the repetitions, read "the next" instead of "any" in the first join.
2nd Row. Hold the work in the hand, and between each oval continue working with the figured shuttle thread round the little finger. 3 D, L, 3 D tie to the last L of plain shuttle thread, 3 D. Begin a plain oval with the figured shuttle, 3 D, L, 3 D draw tight. 3 D tie to the next L of plain shuttle thread, 3 D. Take the figured shuttle and tie to the L of the plain oval, leaving about ¼ inch of cotton. Begin an oval (close to this tie), 7 D, take the centre circle and join to the space over any of its ovals; 7 D draw tight. Tie as before to the L of the plain oval; 3 D tie to the next L of plain shuttle thread, 3 D. Begin a plain oval, with the figured shuttle; 3 D join to the L of the 1st plain oval (this will be the 3rd tie in the same L); 3 D draw tight. 3 D tie to the next plain shuttle L; 3 D, L, 3 D tie to the next plain shuttle L, 3 D. Begin an oval with the figured shuttle; 3 D join to the next space (to the right) of the centre piece; 3 D draw tight. 3 D tie to the next L of plain shuttle thread; and repeat this row 6 times, or until you have joined to the 12 spaces of the centre circle—fasten off.